linux_dsm_epyc7002/arch/arm/mach-omap2/i2c.h

/* SPDX-License-Identifier: GPL-2.0-only */
/*
 * Helper module for board specific I2C bus registration
 *
 * Copyright (C) 2009 Nokia Corporation.
 */

#ifndef __MACH_OMAP2_I2C_H
#define __MACH_OMAP2_I2C_H

struct omap_hwmod;

int omap_i2c_reset(struct omap_hwmod *oh);

#endif	/* __MACH_OMAP2_I2C_H */
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 336 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin st fifth floor boston ma 02110 1301 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 246 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000436.674189849@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2019-05-30 06:57:50 +07:00			`/* SPDX-License-Identifier: GPL-2.0-only */`
omap: Split i2c platform init for mach-omap1 and mach-omap2 Otherwise we cannot limit new mux code to mach-omap2. The same signal names should eventually work for other omaps under mach-omap2. Note that these pins don't need to be OMAP_PIN_INPUT_PULLUP, just OMAP_PIN_INPUT is enough. Cc: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> 2009-12-12 07:16:32 +07:00			`/*`
			`* Helper module for board specific I2C bus registration`
			`*`
			`* Copyright (C) 2009 Nokia Corporation.`
			`*/`

ARM: OMAP: Split plat-omap/i2c.c into mach-omap1 and mach-omap2 There's no need to keep the device related things in the common i2c.c as omap2+ is using hwmod. Split the code to mach-omap1 and mach-omap2 parts and only leave common code to plat-omap/i2c.c. Note that as omap1 only has one i2c controller, we can now remove the old device related macros. Reviewed-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> 2012-10-08 23:11:22 +07:00			`#ifndef __MACH_OMAP2_I2C_H`
			`#define __MACH_OMAP2_I2C_H`
omap: Split i2c platform init for mach-omap1 and mach-omap2 Otherwise we cannot limit new mux code to mach-omap2. The same signal names should eventually work for other omaps under mach-omap2. Note that these pins don't need to be OMAP_PIN_INPUT_PULLUP, just OMAP_PIN_INPUT is enough. Cc: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> 2009-12-12 07:16:32 +07:00
ARM: OMAP: Move plat/i2c.h into mach-omap1 folder The current contents of plat/i2c.h are only relevant for OMAP1 platforms, as all the equivalent functions for OMAP2 has been dropped in commit 65fa3e719f36 ("ARM: OMAP2+: Remove legacy i2c.c platform init code"), and which has also moved the left-over code from plat-omap into mach-omap1. The hwmod is a concept only applicable for OMAP2 platforms, and the omap_i2c_reset() is already declared in mach-omap2/i2c.h. So, move the current plat/i2c.h header file into the mach-omap1 folder, and adjust the header usage accordingly. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> 2018-02-13 08:32:42 +07:00			`struct omap_hwmod;`

OMAP: hwmod: fix the i2c-reset timeout during bootup The sequence of _ocp_softreset doesn't work for i2c. The i2c module has a special sequence to reset the module. The sequence is - Disable the I2C. - Write to SOFTRESET bit. - Enable the I2C. - Poll on the RESETDONE bit. The sequence is implemented as a function and the i2c_class is updated with the correct 'reset' pointer. omap_hwmod_softreset function is implemented which triggers the softreset by writing into sysconfig register. On following this sequence, i2c module resets properly and timeouts are not seen. Cc: Rajendra Nayak <rnayak@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@ti.com> Signed-off-by: Avinash.H.M <avinashhm@ti.com> [paul@pwsan.com: combined this patch with a patch to remove HWMOD_INIT_NO_RESET from the 44xx hwmod flags; change register offset conditional code to use the IP block revision; minor code cleanup] Signed-off-by: Paul Walmsley <paul@pwsan.com> 2011-07-10 18:27:16 +07:00			`int omap_i2c_reset(struct omap_hwmod *oh);`

ARM: OMAP: Split plat-omap/i2c.c into mach-omap1 and mach-omap2 There's no need to keep the device related things in the common i2c.c as omap2+ is using hwmod. Split the code to mach-omap1 and mach-omap2 parts and only leave common code to plat-omap/i2c.c. Note that as omap1 only has one i2c controller, we can now remove the old device related macros. Reviewed-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> 2012-10-08 23:11:22 +07:00			`#endif /* __MACH_OMAP2_I2C_H */`