linux_dsm_epyc7002/include/linux/platform_data/mtd-nand-omap2.h

68 lines
2.1 KiB
C
Raw Normal View History

/*
* Copyright (C) 2006 Micron Technology Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef _MTD_NAND_OMAP2_H
#define _MTD_NAND_OMAP2_H
#include <linux/mtd/partitions.h>
#define GPMC_BCH_NUM_REMAINDER 8
enum nand_io {
NAND_OMAP_PREFETCH_POLLED = 0, /* prefetch polled mode, default */
NAND_OMAP_POLLED, /* polled mode, without prefetch */
NAND_OMAP_PREFETCH_DMA, /* prefetch enabled sDMA mode */
NAND_OMAP_PREFETCH_IRQ /* prefetch enabled irq mode */
};
enum omap_ecc {
/*
* 1-bit ECC: calculation and correction by SW
* ECC stored at end of spare area
*/
OMAP_ECC_HAM1_CODE_SW = 0,
/*
* 1-bit ECC: calculation by GPMC, Error detection by Software
* ECC layout compatible with ROM code layout
*/
OMAP_ECC_HAM1_CODE_HW,
ARM: OMAP2+: cleaned-up DT support of various ECC schemes OMAP NAND driver support multiple ECC scheme, which can used in different flavours, depending on in-build Hardware engines present on SoC. This patch updates following in DT bindings related to sectionion of ecc-schemes - ti,elm-id: replaces elm_id (maintains backward compatibility) - ti,nand-ecc-opts: selection of h/w or s/w implementation of an ecc-scheme depends on ti,elm-id. (supported values ham1, bch4, and bch8) - maintain backward compatibility to deprecated DT bindings (sw, hw, hw-romcode) Below table shows different flavours of ecc-schemes supported by OMAP devices +---------------------------------------+---------------+---------------+ | ECC scheme |ECC calculation|Error detection| +---------------------------------------+---------------+---------------+ |OMAP_ECC_HAM1_CODE_HW |H/W (GPMC) |S/W | +---------------------------------------+---------------+---------------+ |OMAP_ECC_BCH8_CODE_HW_DETECTION_SW |H/W (GPMC) |S/W | |(requires CONFIG_MTD_NAND_ECC_BCH) | | | +---------------------------------------+---------------+---------------+ |OMAP_ECC_BCH8_CODE_HW |H/W (GPMC) |H/W (ELM) | |(requires CONFIG_MTD_NAND_OMAP_BCH && | | | | ti,elm-id in DT) | | | +---------------------------------------+---------------+---------------+ To optimize footprint of omap2-nand driver, selection of some ECC schemes also require enabling following Kconfigs, in addition to setting appropriate DT bindings - Kconfig:CONFIG_MTD_NAND_ECC_BCH error detection done in software - Kconfig:CONFIG_MTD_NAND_OMAP_BCH error detection done by h/w engine Signed-off-by: Pekon Gupta <pekon@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-10-24 19:50:17 +07:00
/* 4-bit ECC calculation by GPMC, Error detection by Software */
OMAP_ECC_BCH4_CODE_HW_DETECTION_SW,
/* 4-bit ECC calculation by GPMC, Error detection by ELM */
OMAP_ECC_BCH4_CODE_HW,
/* 8-bit ECC calculation by GPMC, Error detection by Software */
OMAP_ECC_BCH8_CODE_HW_DETECTION_SW,
/* 8-bit ECC calculation by GPMC, Error detection by ELM */
OMAP_ECC_BCH8_CODE_HW,
/* 16-bit ECC calculation by GPMC, Error detection by ELM */
OMAP_ECC_BCH16_CODE_HW,
};
struct gpmc_nand_regs {
void __iomem *gpmc_nand_command;
void __iomem *gpmc_nand_address;
void __iomem *gpmc_nand_data;
void __iomem *gpmc_prefetch_config1;
void __iomem *gpmc_prefetch_config2;
void __iomem *gpmc_prefetch_control;
void __iomem *gpmc_prefetch_status;
void __iomem *gpmc_ecc_config;
void __iomem *gpmc_ecc_control;
void __iomem *gpmc_ecc_size_config;
void __iomem *gpmc_ecc1_result;
void __iomem *gpmc_bch_result0[GPMC_BCH_NUM_REMAINDER];
void __iomem *gpmc_bch_result1[GPMC_BCH_NUM_REMAINDER];
void __iomem *gpmc_bch_result2[GPMC_BCH_NUM_REMAINDER];
void __iomem *gpmc_bch_result3[GPMC_BCH_NUM_REMAINDER];
void __iomem *gpmc_bch_result4[GPMC_BCH_NUM_REMAINDER];
void __iomem *gpmc_bch_result5[GPMC_BCH_NUM_REMAINDER];
void __iomem *gpmc_bch_result6[GPMC_BCH_NUM_REMAINDER];
};
#endif