linux_dsm_epyc7002/drivers/acpi/tables/tbutils.c

559 lines
16 KiB
C
Raw Normal View History

/******************************************************************************
*
* Module Name: tbutils - table utilities
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#include <acpi/acpi.h>
#include <acpi/actables.h>
#define _COMPONENT ACPI_TABLES
ACPI_MODULE_NAME("tbutils")
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 09:49:35 +07:00
/* Local prototypes */
static acpi_physical_address
acpi_tb_get_root_table_entry(u8 * table_entry,
acpi_native_uint table_entry_size);
/*******************************************************************************
*
* FUNCTION: acpi_tb_check_xsdt
*
* PARAMETERS: address - Pointer to the XSDT
*
* RETURN: status
* AE_OK - XSDT is okay
* AE_NO_MEMORY - can't map XSDT
* AE_INVALID_TABLE_LENGTH - invalid table length
* AE_NULL_ENTRY - XSDT has NULL entry
*
* DESCRIPTION: validate XSDT
******************************************************************************/
static acpi_status
acpi_tb_check_xsdt(acpi_physical_address address)
{
struct acpi_table_header *table;
u32 length;
u64 xsdt_entry_address;
u8 *table_entry;
u32 table_count;
int i;
table = acpi_os_map_memory(address, sizeof(struct acpi_table_header));
if (!table)
return AE_NO_MEMORY;
length = table->length;
acpi_os_unmap_memory(table, sizeof(struct acpi_table_header));
if (length < sizeof(struct acpi_table_header))
return AE_INVALID_TABLE_LENGTH;
table = acpi_os_map_memory(address, length);
if (!table)
return AE_NO_MEMORY;
/* Calculate the number of tables described in XSDT */
table_count =
(u32) ((table->length -
sizeof(struct acpi_table_header)) / sizeof(u64));
table_entry =
ACPI_CAST_PTR(u8, table) + sizeof(struct acpi_table_header);
for (i = 0; i < table_count; i++) {
ACPI_MOVE_64_TO_64(&xsdt_entry_address, table_entry);
if (!xsdt_entry_address) {
/* XSDT has NULL entry */
break;
}
table_entry += sizeof(u64);
}
acpi_os_unmap_memory(table, length);
if (i < table_count)
return AE_NULL_ENTRY;
else
return AE_OK;
}
/*******************************************************************************
*
* FUNCTION: acpi_tb_tables_loaded
*
* PARAMETERS: None
*
* RETURN: TRUE if required ACPI tables are loaded
*
* DESCRIPTION: Determine if the minimum required ACPI tables are present
* (FADT, FACS, DSDT)
*
******************************************************************************/
u8 acpi_tb_tables_loaded(void)
{
if (acpi_gbl_root_table_list.count >= 3) {
return (TRUE);
}
return (FALSE);
}
/*******************************************************************************
*
* FUNCTION: acpi_tb_print_table_header
*
* PARAMETERS: Address - Table physical address
* Header - Table header
*
* RETURN: None
*
* DESCRIPTION: Print an ACPI table header. Special cases for FACS and RSDP.
*
******************************************************************************/
void
acpi_tb_print_table_header(acpi_physical_address address,
struct acpi_table_header *header)
{
if (ACPI_COMPARE_NAME(header->signature, ACPI_SIG_FACS)) {
/* FACS only has signature and length fields of common table header */
ACPI_INFO((AE_INFO, "%4.4s %08lX, %04X",
header->signature, (unsigned long)address,
header->length));
} else if (ACPI_COMPARE_NAME(header->signature, ACPI_SIG_RSDP)) {
/* RSDP has no common fields */
ACPI_INFO((AE_INFO, "RSDP %08lX, %04X (r%d %6.6s)",
(unsigned long)address,
(ACPI_CAST_PTR(struct acpi_table_rsdp, header)->
revision >
0) ? ACPI_CAST_PTR(struct acpi_table_rsdp,
header)->length : 20,
ACPI_CAST_PTR(struct acpi_table_rsdp,
header)->revision,
ACPI_CAST_PTR(struct acpi_table_rsdp,
header)->oem_id));
} else {
/* Standard ACPI table with full common header */
ACPI_INFO((AE_INFO,
"%4.4s %08lX, %04X (r%d %6.6s %8.8s %8X %4.4s %8X)",
header->signature, (unsigned long)address,
header->length, header->revision, header->oem_id,
header->oem_table_id, header->oem_revision,
header->asl_compiler_id,
header->asl_compiler_revision));
}
}
/*******************************************************************************
*
* FUNCTION: acpi_tb_validate_checksum
*
* PARAMETERS: Table - ACPI table to verify
* Length - Length of entire table
*
* RETURN: Status
*
* DESCRIPTION: Verifies that the table checksums to zero. Optionally returns
* exception on bad checksum.
*
******************************************************************************/
acpi_status acpi_tb_verify_checksum(struct acpi_table_header *table, u32 length)
{
u8 checksum;
/* Compute the checksum on the table */
checksum = acpi_tb_checksum(ACPI_CAST_PTR(u8, table), length);
/* Checksum ok? (should be zero) */
if (checksum) {
ACPI_WARNING((AE_INFO,
"Incorrect checksum in table [%4.4s] - %2.2X, should be %2.2X",
table->signature, table->checksum,
(u8) (table->checksum - checksum)));
#if (ACPI_CHECKSUM_ABORT)
return (AE_BAD_CHECKSUM);
#endif
}
return (AE_OK);
}
/*******************************************************************************
*
* FUNCTION: acpi_tb_checksum
*
* PARAMETERS: Buffer - Pointer to memory region to be checked
* Length - Length of this memory region
*
* RETURN: Checksum (u8)
*
* DESCRIPTION: Calculates circular checksum of memory region.
*
******************************************************************************/
u8 acpi_tb_checksum(u8 * buffer, acpi_native_uint length)
ACPI: ACPICA 20060331 Implemented header file support for the following additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR, SPMI, TCPA, and WDRT. With this support, all current and known ACPI tables are now defined in the ACPICA headers and are available for use by device drivers and other software. Implemented support to allow tables that contain ACPI names with invalid characters to be loaded. Previously, this would cause the table load to fail, but since there are several known cases of such tables on existing machines, this change was made to enable ACPI support for them. Also, this matches the behavior of the Microsoft ACPI implementation. https://bugzilla.novell.com/show_bug.cgi?id=147621 Fixed a couple regressions introduced during the memory optimization in the 20060317 release. The namespace node definition required additional reorganization and an internal datatype that had been changed to 8-bit was restored to 32-bit. (Valery Podrezov) Fixed a problem where a null pointer passed to acpi_ut_delete_generic_state() could be passed through to acpi_os_release_object which is unexpected. Such null pointers are now trapped and ignored, matching the behavior of the previous implementation before the deployment of acpi_os_release_object(). (Valery Podrezov, Fiodor Suietov) Fixed a memory mapping leak during the deletion of a SystemMemory operation region where a cached memory mapping was not deleted. This became a noticeable problem for operation regions that are defined within frequently used control methods. (Dana Meyers) Reorganized the ACPI table header files into two main files: one for the ACPI tables consumed by the ACPICA core, and another for the miscellaneous ACPI tables that are consumed by the drivers and other software. The various FADT definitions were merged into one common section and three different tables (ACPI 1.0, 1.0+, and 2.0) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-31 12:00:00 +07:00
{
u8 sum = 0;
u8 *end = buffer + length;
ACPI: ACPICA 20060331 Implemented header file support for the following additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR, SPMI, TCPA, and WDRT. With this support, all current and known ACPI tables are now defined in the ACPICA headers and are available for use by device drivers and other software. Implemented support to allow tables that contain ACPI names with invalid characters to be loaded. Previously, this would cause the table load to fail, but since there are several known cases of such tables on existing machines, this change was made to enable ACPI support for them. Also, this matches the behavior of the Microsoft ACPI implementation. https://bugzilla.novell.com/show_bug.cgi?id=147621 Fixed a couple regressions introduced during the memory optimization in the 20060317 release. The namespace node definition required additional reorganization and an internal datatype that had been changed to 8-bit was restored to 32-bit. (Valery Podrezov) Fixed a problem where a null pointer passed to acpi_ut_delete_generic_state() could be passed through to acpi_os_release_object which is unexpected. Such null pointers are now trapped and ignored, matching the behavior of the previous implementation before the deployment of acpi_os_release_object(). (Valery Podrezov, Fiodor Suietov) Fixed a memory mapping leak during the deletion of a SystemMemory operation region where a cached memory mapping was not deleted. This became a noticeable problem for operation regions that are defined within frequently used control methods. (Dana Meyers) Reorganized the ACPI table header files into two main files: one for the ACPI tables consumed by the ACPICA core, and another for the miscellaneous ACPI tables that are consumed by the drivers and other software. The various FADT definitions were merged into one common section and three different tables (ACPI 1.0, 1.0+, and 2.0) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-31 12:00:00 +07:00
while (buffer < end) {
sum = (u8) (sum + *(buffer++));
ACPI: ACPICA 20060331 Implemented header file support for the following additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR, SPMI, TCPA, and WDRT. With this support, all current and known ACPI tables are now defined in the ACPICA headers and are available for use by device drivers and other software. Implemented support to allow tables that contain ACPI names with invalid characters to be loaded. Previously, this would cause the table load to fail, but since there are several known cases of such tables on existing machines, this change was made to enable ACPI support for them. Also, this matches the behavior of the Microsoft ACPI implementation. https://bugzilla.novell.com/show_bug.cgi?id=147621 Fixed a couple regressions introduced during the memory optimization in the 20060317 release. The namespace node definition required additional reorganization and an internal datatype that had been changed to 8-bit was restored to 32-bit. (Valery Podrezov) Fixed a problem where a null pointer passed to acpi_ut_delete_generic_state() could be passed through to acpi_os_release_object which is unexpected. Such null pointers are now trapped and ignored, matching the behavior of the previous implementation before the deployment of acpi_os_release_object(). (Valery Podrezov, Fiodor Suietov) Fixed a memory mapping leak during the deletion of a SystemMemory operation region where a cached memory mapping was not deleted. This became a noticeable problem for operation regions that are defined within frequently used control methods. (Dana Meyers) Reorganized the ACPI table header files into two main files: one for the ACPI tables consumed by the ACPICA core, and another for the miscellaneous ACPI tables that are consumed by the drivers and other software. The various FADT definitions were merged into one common section and three different tables (ACPI 1.0, 1.0+, and 2.0) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-31 12:00:00 +07:00
}
return sum;
ACPI: ACPICA 20060331 Implemented header file support for the following additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR, SPMI, TCPA, and WDRT. With this support, all current and known ACPI tables are now defined in the ACPICA headers and are available for use by device drivers and other software. Implemented support to allow tables that contain ACPI names with invalid characters to be loaded. Previously, this would cause the table load to fail, but since there are several known cases of such tables on existing machines, this change was made to enable ACPI support for them. Also, this matches the behavior of the Microsoft ACPI implementation. https://bugzilla.novell.com/show_bug.cgi?id=147621 Fixed a couple regressions introduced during the memory optimization in the 20060317 release. The namespace node definition required additional reorganization and an internal datatype that had been changed to 8-bit was restored to 32-bit. (Valery Podrezov) Fixed a problem where a null pointer passed to acpi_ut_delete_generic_state() could be passed through to acpi_os_release_object which is unexpected. Such null pointers are now trapped and ignored, matching the behavior of the previous implementation before the deployment of acpi_os_release_object(). (Valery Podrezov, Fiodor Suietov) Fixed a memory mapping leak during the deletion of a SystemMemory operation region where a cached memory mapping was not deleted. This became a noticeable problem for operation regions that are defined within frequently used control methods. (Dana Meyers) Reorganized the ACPI table header files into two main files: one for the ACPI tables consumed by the ACPICA core, and another for the miscellaneous ACPI tables that are consumed by the drivers and other software. The various FADT definitions were merged into one common section and three different tables (ACPI 1.0, 1.0+, and 2.0) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-31 12:00:00 +07:00
}
/*******************************************************************************
*
* FUNCTION: acpi_tb_install_table
*
* PARAMETERS: Address - Physical address of DSDT or FACS
* Flags - Flags
* Signature - Table signature, NULL if no need to
* match
* table_index - Index into root table array
*
* RETURN: None
*
* DESCRIPTION: Install an ACPI table into the global data structure.
*
******************************************************************************/
void
acpi_tb_install_table(acpi_physical_address address,
u8 flags, char *signature, acpi_native_uint table_index)
{
struct acpi_table_header *table;
if (!address) {
ACPI_ERROR((AE_INFO,
"Null physical address for ACPI table [%s]",
signature));
return;
}
/* Map just the table header */
table = acpi_os_map_memory(address, sizeof(struct acpi_table_header));
if (!table) {
return;
}
/* If a particular signature is expected, signature must match */
if (signature && !ACPI_COMPARE_NAME(table->signature, signature)) {
ACPI_ERROR((AE_INFO,
"Invalid signature 0x%X for ACPI table [%s]",
*ACPI_CAST_PTR(u32, table->signature), signature));
goto unmap_and_exit;
}
/* Initialize the table entry */
acpi_gbl_root_table_list.tables[table_index].address = address;
acpi_gbl_root_table_list.tables[table_index].length = table->length;
acpi_gbl_root_table_list.tables[table_index].flags = flags;
ACPI_MOVE_32_TO_32(&
(acpi_gbl_root_table_list.tables[table_index].
signature), table->signature);
acpi_tb_print_table_header(address, table);
if (table_index == ACPI_TABLE_INDEX_DSDT) {
/* Global integer width is based upon revision of the DSDT */
acpi_ut_set_integer_width(table->revision);
}
unmap_and_exit:
acpi_os_unmap_memory(table, sizeof(struct acpi_table_header));
}
/*******************************************************************************
*
* FUNCTION: acpi_tb_get_root_table_entry
*
* PARAMETERS: table_entry - Pointer to the RSDT/XSDT table entry
* table_entry_size - sizeof 32 or 64 (RSDT or XSDT)
*
* RETURN: Physical address extracted from the root table
*
* DESCRIPTION: Get one root table entry. Handles 32-bit and 64-bit cases on
* both 32-bit and 64-bit platforms
*
* NOTE: acpi_physical_address is 32-bit on 32-bit platforms, 64-bit on
* 64-bit platforms.
*
******************************************************************************/
static acpi_physical_address
acpi_tb_get_root_table_entry(u8 * table_entry,
acpi_native_uint table_entry_size)
{
u64 address64;
/*
* Get the table physical address (32-bit for RSDT, 64-bit for XSDT):
* Note: Addresses are 32-bit aligned (not 64) in both RSDT and XSDT
*/
if (table_entry_size == sizeof(u32)) {
/*
* 32-bit platform, RSDT: Return 32-bit table entry
* 64-bit platform, RSDT: Expand 32-bit to 64-bit and return
*/
return ((acpi_physical_address)
(*ACPI_CAST_PTR(u32, table_entry)));
} else {
/*
* 32-bit platform, XSDT: Truncate 64-bit to 32-bit and return
* 64-bit platform, XSDT: Move (unaligned) 64-bit to local, return 64-bit
*/
ACPI_MOVE_64_TO_64(&address64, table_entry);
#if ACPI_MACHINE_WIDTH == 32
if (address64 > ACPI_UINT32_MAX) {
/* Will truncate 64-bit address to 32 bits, issue warning */
ACPI_WARNING((AE_INFO,
"64-bit Physical Address in XSDT is too large (%8.8X%8.8X), truncating",
ACPI_FORMAT_UINT64(address64)));
}
#endif
return ((acpi_physical_address) (address64));
}
}
ACPI: ACPICA 20060331 Implemented header file support for the following additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR, SPMI, TCPA, and WDRT. With this support, all current and known ACPI tables are now defined in the ACPICA headers and are available for use by device drivers and other software. Implemented support to allow tables that contain ACPI names with invalid characters to be loaded. Previously, this would cause the table load to fail, but since there are several known cases of such tables on existing machines, this change was made to enable ACPI support for them. Also, this matches the behavior of the Microsoft ACPI implementation. https://bugzilla.novell.com/show_bug.cgi?id=147621 Fixed a couple regressions introduced during the memory optimization in the 20060317 release. The namespace node definition required additional reorganization and an internal datatype that had been changed to 8-bit was restored to 32-bit. (Valery Podrezov) Fixed a problem where a null pointer passed to acpi_ut_delete_generic_state() could be passed through to acpi_os_release_object which is unexpected. Such null pointers are now trapped and ignored, matching the behavior of the previous implementation before the deployment of acpi_os_release_object(). (Valery Podrezov, Fiodor Suietov) Fixed a memory mapping leak during the deletion of a SystemMemory operation region where a cached memory mapping was not deleted. This became a noticeable problem for operation regions that are defined within frequently used control methods. (Dana Meyers) Reorganized the ACPI table header files into two main files: one for the ACPI tables consumed by the ACPICA core, and another for the miscellaneous ACPI tables that are consumed by the drivers and other software. The various FADT definitions were merged into one common section and three different tables (ACPI 1.0, 1.0+, and 2.0) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-31 12:00:00 +07:00
/*******************************************************************************
*
* FUNCTION: acpi_tb_parse_root_table
ACPI: ACPICA 20060331 Implemented header file support for the following additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR, SPMI, TCPA, and WDRT. With this support, all current and known ACPI tables are now defined in the ACPICA headers and are available for use by device drivers and other software. Implemented support to allow tables that contain ACPI names with invalid characters to be loaded. Previously, this would cause the table load to fail, but since there are several known cases of such tables on existing machines, this change was made to enable ACPI support for them. Also, this matches the behavior of the Microsoft ACPI implementation. https://bugzilla.novell.com/show_bug.cgi?id=147621 Fixed a couple regressions introduced during the memory optimization in the 20060317 release. The namespace node definition required additional reorganization and an internal datatype that had been changed to 8-bit was restored to 32-bit. (Valery Podrezov) Fixed a problem where a null pointer passed to acpi_ut_delete_generic_state() could be passed through to acpi_os_release_object which is unexpected. Such null pointers are now trapped and ignored, matching the behavior of the previous implementation before the deployment of acpi_os_release_object(). (Valery Podrezov, Fiodor Suietov) Fixed a memory mapping leak during the deletion of a SystemMemory operation region where a cached memory mapping was not deleted. This became a noticeable problem for operation regions that are defined within frequently used control methods. (Dana Meyers) Reorganized the ACPI table header files into two main files: one for the ACPI tables consumed by the ACPICA core, and another for the miscellaneous ACPI tables that are consumed by the drivers and other software. The various FADT definitions were merged into one common section and three different tables (ACPI 1.0, 1.0+, and 2.0) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-31 12:00:00 +07:00
*
* PARAMETERS: Rsdp - Pointer to the RSDP
* Flags - Flags
*
* RETURN: Status
ACPI: ACPICA 20060331 Implemented header file support for the following additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR, SPMI, TCPA, and WDRT. With this support, all current and known ACPI tables are now defined in the ACPICA headers and are available for use by device drivers and other software. Implemented support to allow tables that contain ACPI names with invalid characters to be loaded. Previously, this would cause the table load to fail, but since there are several known cases of such tables on existing machines, this change was made to enable ACPI support for them. Also, this matches the behavior of the Microsoft ACPI implementation. https://bugzilla.novell.com/show_bug.cgi?id=147621 Fixed a couple regressions introduced during the memory optimization in the 20060317 release. The namespace node definition required additional reorganization and an internal datatype that had been changed to 8-bit was restored to 32-bit. (Valery Podrezov) Fixed a problem where a null pointer passed to acpi_ut_delete_generic_state() could be passed through to acpi_os_release_object which is unexpected. Such null pointers are now trapped and ignored, matching the behavior of the previous implementation before the deployment of acpi_os_release_object(). (Valery Podrezov, Fiodor Suietov) Fixed a memory mapping leak during the deletion of a SystemMemory operation region where a cached memory mapping was not deleted. This became a noticeable problem for operation regions that are defined within frequently used control methods. (Dana Meyers) Reorganized the ACPI table header files into two main files: one for the ACPI tables consumed by the ACPICA core, and another for the miscellaneous ACPI tables that are consumed by the drivers and other software. The various FADT definitions were merged into one common section and three different tables (ACPI 1.0, 1.0+, and 2.0) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-31 12:00:00 +07:00
*
* DESCRIPTION: This function is called to parse the Root System Description
* Table (RSDT or XSDT)
ACPI: ACPICA 20060331 Implemented header file support for the following additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR, SPMI, TCPA, and WDRT. With this support, all current and known ACPI tables are now defined in the ACPICA headers and are available for use by device drivers and other software. Implemented support to allow tables that contain ACPI names with invalid characters to be loaded. Previously, this would cause the table load to fail, but since there are several known cases of such tables on existing machines, this change was made to enable ACPI support for them. Also, this matches the behavior of the Microsoft ACPI implementation. https://bugzilla.novell.com/show_bug.cgi?id=147621 Fixed a couple regressions introduced during the memory optimization in the 20060317 release. The namespace node definition required additional reorganization and an internal datatype that had been changed to 8-bit was restored to 32-bit. (Valery Podrezov) Fixed a problem where a null pointer passed to acpi_ut_delete_generic_state() could be passed through to acpi_os_release_object which is unexpected. Such null pointers are now trapped and ignored, matching the behavior of the previous implementation before the deployment of acpi_os_release_object(). (Valery Podrezov, Fiodor Suietov) Fixed a memory mapping leak during the deletion of a SystemMemory operation region where a cached memory mapping was not deleted. This became a noticeable problem for operation regions that are defined within frequently used control methods. (Dana Meyers) Reorganized the ACPI table header files into two main files: one for the ACPI tables consumed by the ACPICA core, and another for the miscellaneous ACPI tables that are consumed by the drivers and other software. The various FADT definitions were merged into one common section and three different tables (ACPI 1.0, 1.0+, and 2.0) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-31 12:00:00 +07:00
*
* NOTE: Tables are mapped (not copied) for efficiency. The FACS must
* be mapped and cannot be copied because it contains the actual
* memory location of the ACPI Global Lock.
ACPI: ACPICA 20060331 Implemented header file support for the following additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR, SPMI, TCPA, and WDRT. With this support, all current and known ACPI tables are now defined in the ACPICA headers and are available for use by device drivers and other software. Implemented support to allow tables that contain ACPI names with invalid characters to be loaded. Previously, this would cause the table load to fail, but since there are several known cases of such tables on existing machines, this change was made to enable ACPI support for them. Also, this matches the behavior of the Microsoft ACPI implementation. https://bugzilla.novell.com/show_bug.cgi?id=147621 Fixed a couple regressions introduced during the memory optimization in the 20060317 release. The namespace node definition required additional reorganization and an internal datatype that had been changed to 8-bit was restored to 32-bit. (Valery Podrezov) Fixed a problem where a null pointer passed to acpi_ut_delete_generic_state() could be passed through to acpi_os_release_object which is unexpected. Such null pointers are now trapped and ignored, matching the behavior of the previous implementation before the deployment of acpi_os_release_object(). (Valery Podrezov, Fiodor Suietov) Fixed a memory mapping leak during the deletion of a SystemMemory operation region where a cached memory mapping was not deleted. This became a noticeable problem for operation regions that are defined within frequently used control methods. (Dana Meyers) Reorganized the ACPI table header files into two main files: one for the ACPI tables consumed by the ACPICA core, and another for the miscellaneous ACPI tables that are consumed by the drivers and other software. The various FADT definitions were merged into one common section and three different tables (ACPI 1.0, 1.0+, and 2.0) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-31 12:00:00 +07:00
*
******************************************************************************/
acpi_status __init
acpi_tb_parse_root_table(acpi_physical_address rsdp_address, u8 flags)
ACPI: ACPICA 20060331 Implemented header file support for the following additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR, SPMI, TCPA, and WDRT. With this support, all current and known ACPI tables are now defined in the ACPICA headers and are available for use by device drivers and other software. Implemented support to allow tables that contain ACPI names with invalid characters to be loaded. Previously, this would cause the table load to fail, but since there are several known cases of such tables on existing machines, this change was made to enable ACPI support for them. Also, this matches the behavior of the Microsoft ACPI implementation. https://bugzilla.novell.com/show_bug.cgi?id=147621 Fixed a couple regressions introduced during the memory optimization in the 20060317 release. The namespace node definition required additional reorganization and an internal datatype that had been changed to 8-bit was restored to 32-bit. (Valery Podrezov) Fixed a problem where a null pointer passed to acpi_ut_delete_generic_state() could be passed through to acpi_os_release_object which is unexpected. Such null pointers are now trapped and ignored, matching the behavior of the previous implementation before the deployment of acpi_os_release_object(). (Valery Podrezov, Fiodor Suietov) Fixed a memory mapping leak during the deletion of a SystemMemory operation region where a cached memory mapping was not deleted. This became a noticeable problem for operation regions that are defined within frequently used control methods. (Dana Meyers) Reorganized the ACPI table header files into two main files: one for the ACPI tables consumed by the ACPICA core, and another for the miscellaneous ACPI tables that are consumed by the drivers and other software. The various FADT definitions were merged into one common section and three different tables (ACPI 1.0, 1.0+, and 2.0) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-31 12:00:00 +07:00
{
struct acpi_table_rsdp *rsdp;
acpi_native_uint table_entry_size;
acpi_native_uint i;
u32 table_count;
struct acpi_table_header *table;
acpi_physical_address address;
acpi_physical_address rsdt_address;
u32 length;
u8 *table_entry;
acpi_status status;
ACPI_FUNCTION_TRACE(tb_parse_root_table);
/*
* Map the entire RSDP and extract the address of the RSDT or XSDT
*/
rsdp = acpi_os_map_memory(rsdp_address, sizeof(struct acpi_table_rsdp));
if (!rsdp) {
return_ACPI_STATUS(AE_NO_MEMORY);
}
acpi_tb_print_table_header(rsdp_address,
ACPI_CAST_PTR(struct acpi_table_header,
rsdp));
/* Differentiate between RSDT and XSDT root tables */
if (rsdp->revision > 1 && rsdp->xsdt_physical_address) {
/*
* Root table is an XSDT (64-bit physical addresses). We must use the
* XSDT if the revision is > 1 and the XSDT pointer is present, as per
* the ACPI specification.
*/
address = (acpi_physical_address) rsdp->xsdt_physical_address;
table_entry_size = sizeof(u64);
rsdt_address = (acpi_physical_address)
rsdp->rsdt_physical_address;
} else {
/* Root table is an RSDT (32-bit physical addresses) */
address = (acpi_physical_address) rsdp->rsdt_physical_address;
table_entry_size = sizeof(u32);
}
ACPI: ACPICA 20060331 Implemented header file support for the following additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR, SPMI, TCPA, and WDRT. With this support, all current and known ACPI tables are now defined in the ACPICA headers and are available for use by device drivers and other software. Implemented support to allow tables that contain ACPI names with invalid characters to be loaded. Previously, this would cause the table load to fail, but since there are several known cases of such tables on existing machines, this change was made to enable ACPI support for them. Also, this matches the behavior of the Microsoft ACPI implementation. https://bugzilla.novell.com/show_bug.cgi?id=147621 Fixed a couple regressions introduced during the memory optimization in the 20060317 release. The namespace node definition required additional reorganization and an internal datatype that had been changed to 8-bit was restored to 32-bit. (Valery Podrezov) Fixed a problem where a null pointer passed to acpi_ut_delete_generic_state() could be passed through to acpi_os_release_object which is unexpected. Such null pointers are now trapped and ignored, matching the behavior of the previous implementation before the deployment of acpi_os_release_object(). (Valery Podrezov, Fiodor Suietov) Fixed a memory mapping leak during the deletion of a SystemMemory operation region where a cached memory mapping was not deleted. This became a noticeable problem for operation regions that are defined within frequently used control methods. (Dana Meyers) Reorganized the ACPI table header files into two main files: one for the ACPI tables consumed by the ACPICA core, and another for the miscellaneous ACPI tables that are consumed by the drivers and other software. The various FADT definitions were merged into one common section and three different tables (ACPI 1.0, 1.0+, and 2.0) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-31 12:00:00 +07:00
/*
* It is not possible to map more than one entry in some environments,
* so unmap the RSDP here before mapping other tables
*/
acpi_os_unmap_memory(rsdp, sizeof(struct acpi_table_rsdp));
if (table_entry_size == sizeof(u64)) {
if (acpi_tb_check_xsdt(address) == AE_NULL_ENTRY) {
/* XSDT has NULL entry, RSDT is used */
address = rsdt_address;
table_entry_size = sizeof(u32);
ACPI_WARNING((AE_INFO, "BIOS XSDT has NULL entry,"
"using RSDT"));
}
}
/* Map the RSDT/XSDT table header to get the full table length */
ACPI: ACPICA 20060331 Implemented header file support for the following additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR, SPMI, TCPA, and WDRT. With this support, all current and known ACPI tables are now defined in the ACPICA headers and are available for use by device drivers and other software. Implemented support to allow tables that contain ACPI names with invalid characters to be loaded. Previously, this would cause the table load to fail, but since there are several known cases of such tables on existing machines, this change was made to enable ACPI support for them. Also, this matches the behavior of the Microsoft ACPI implementation. https://bugzilla.novell.com/show_bug.cgi?id=147621 Fixed a couple regressions introduced during the memory optimization in the 20060317 release. The namespace node definition required additional reorganization and an internal datatype that had been changed to 8-bit was restored to 32-bit. (Valery Podrezov) Fixed a problem where a null pointer passed to acpi_ut_delete_generic_state() could be passed through to acpi_os_release_object which is unexpected. Such null pointers are now trapped and ignored, matching the behavior of the previous implementation before the deployment of acpi_os_release_object(). (Valery Podrezov, Fiodor Suietov) Fixed a memory mapping leak during the deletion of a SystemMemory operation region where a cached memory mapping was not deleted. This became a noticeable problem for operation regions that are defined within frequently used control methods. (Dana Meyers) Reorganized the ACPI table header files into two main files: one for the ACPI tables consumed by the ACPICA core, and another for the miscellaneous ACPI tables that are consumed by the drivers and other software. The various FADT definitions were merged into one common section and three different tables (ACPI 1.0, 1.0+, and 2.0) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-31 12:00:00 +07:00
table = acpi_os_map_memory(address, sizeof(struct acpi_table_header));
if (!table) {
return_ACPI_STATUS(AE_NO_MEMORY);
}
acpi_tb_print_table_header(address, table);
/* Get the length of the full table, verify length and map entire table */
length = table->length;
acpi_os_unmap_memory(table, sizeof(struct acpi_table_header));
if (length < sizeof(struct acpi_table_header)) {
ACPI_ERROR((AE_INFO, "Invalid length 0x%X in RSDT/XSDT",
length));
return_ACPI_STATUS(AE_INVALID_TABLE_LENGTH);
}
table = acpi_os_map_memory(address, length);
if (!table) {
return_ACPI_STATUS(AE_NO_MEMORY);
}
/* Validate the root table checksum */
status = acpi_tb_verify_checksum(table, length);
if (ACPI_FAILURE(status)) {
acpi_os_unmap_memory(table, length);
return_ACPI_STATUS(status);
}
/* Calculate the number of tables described in the root table */
table_count =
(u32) ((table->length -
sizeof(struct acpi_table_header)) / table_entry_size);
/*
* First two entries in the table array are reserved for the DSDT and FACS,
* which are not actually present in the RSDT/XSDT - they come from the FADT
*/
table_entry =
ACPI_CAST_PTR(u8, table) + sizeof(struct acpi_table_header);
acpi_gbl_root_table_list.count = 2;
/*
* Initialize the root table array from the RSDT/XSDT
*/
for (i = 0; i < table_count; i++) {
if (acpi_gbl_root_table_list.count >=
acpi_gbl_root_table_list.size) {
/* There is no more room in the root table array, attempt resize */
status = acpi_tb_resize_root_table_list();
if (ACPI_FAILURE(status)) {
ACPI_WARNING((AE_INFO,
"Truncating %u table entries!",
(unsigned)
(acpi_gbl_root_table_list.size -
acpi_gbl_root_table_list.
count)));
break;
}
}
/* Get the table physical address (32-bit for RSDT, 64-bit for XSDT) */
acpi_gbl_root_table_list.tables[acpi_gbl_root_table_list.count].
address =
acpi_tb_get_root_table_entry(table_entry, table_entry_size);
table_entry += table_entry_size;
acpi_gbl_root_table_list.count++;
}
ACPI: ACPICA 20060331 Implemented header file support for the following additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR, SPMI, TCPA, and WDRT. With this support, all current and known ACPI tables are now defined in the ACPICA headers and are available for use by device drivers and other software. Implemented support to allow tables that contain ACPI names with invalid characters to be loaded. Previously, this would cause the table load to fail, but since there are several known cases of such tables on existing machines, this change was made to enable ACPI support for them. Also, this matches the behavior of the Microsoft ACPI implementation. https://bugzilla.novell.com/show_bug.cgi?id=147621 Fixed a couple regressions introduced during the memory optimization in the 20060317 release. The namespace node definition required additional reorganization and an internal datatype that had been changed to 8-bit was restored to 32-bit. (Valery Podrezov) Fixed a problem where a null pointer passed to acpi_ut_delete_generic_state() could be passed through to acpi_os_release_object which is unexpected. Such null pointers are now trapped and ignored, matching the behavior of the previous implementation before the deployment of acpi_os_release_object(). (Valery Podrezov, Fiodor Suietov) Fixed a memory mapping leak during the deletion of a SystemMemory operation region where a cached memory mapping was not deleted. This became a noticeable problem for operation regions that are defined within frequently used control methods. (Dana Meyers) Reorganized the ACPI table header files into two main files: one for the ACPI tables consumed by the ACPICA core, and another for the miscellaneous ACPI tables that are consumed by the drivers and other software. The various FADT definitions were merged into one common section and three different tables (ACPI 1.0, 1.0+, and 2.0) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-31 12:00:00 +07:00
/*
* It is not possible to map more than one entry in some environments,
* so unmap the root table here before mapping other tables
*/
acpi_os_unmap_memory(table, length);
/*
* Complete the initialization of the root table array by examining
* the header of each table
*/
for (i = 2; i < acpi_gbl_root_table_list.count; i++) {
acpi_tb_install_table(acpi_gbl_root_table_list.tables[i].
address, flags, NULL, i);
/* Special case for FADT - get the DSDT and FACS */
if (ACPI_COMPARE_NAME
(&acpi_gbl_root_table_list.tables[i].signature,
ACPI_SIG_FADT)) {
acpi_tb_parse_fadt(i, flags);
}
}
return_ACPI_STATUS(AE_OK);
}