linux_dsm_epyc7002/drivers/gpu/drm/arm/malidp_hw.c

1384 lines
45 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* (C) COPYRIGHT 2016 ARM Limited. All rights reserved.
* Author: Liviu Dudau <Liviu.Dudau@arm.com>
*
* ARM Mali DP500/DP550/DP650 hardware manipulation routines. This is where
* the difference between various versions of the hardware is being dealt with
* in an attempt to provide to the rest of the driver code a unified view
*/
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/types.h>
#include <linux/io.h>
#include <video/videomode.h>
#include <video/display_timing.h>
#include <drm/drm_fourcc.h>
#include <drm/drm_vblank.h>
#include <drm/drm_print.h>
#include "malidp_drv.h"
#include "malidp_hw.h"
#include "malidp_mw.h"
enum {
MW_NOT_ENABLED = 0, /* SE writeback not enabled */
MW_ONESHOT, /* SE in one-shot mode for writeback */
MW_START, /* SE started writeback */
MW_RESTART, /* SE will start another writeback after this one */
MW_STOP, /* SE needs to stop after this writeback */
};
static const struct malidp_format_id malidp500_de_formats[] = {
/* fourcc, layers supporting the format, internal id */
{ DRM_FORMAT_ARGB2101010, DE_VIDEO1 | DE_GRAPHICS1 | DE_GRAPHICS2 | SE_MEMWRITE, 0 },
{ DRM_FORMAT_ABGR2101010, DE_VIDEO1 | DE_GRAPHICS1 | DE_GRAPHICS2 | SE_MEMWRITE, 1 },
{ DRM_FORMAT_ARGB8888, DE_VIDEO1 | DE_GRAPHICS1 | DE_GRAPHICS2, 2 },
{ DRM_FORMAT_ABGR8888, DE_VIDEO1 | DE_GRAPHICS1 | DE_GRAPHICS2, 3 },
{ DRM_FORMAT_XRGB8888, DE_VIDEO1 | DE_GRAPHICS1 | DE_GRAPHICS2 | SE_MEMWRITE, 4 },
{ DRM_FORMAT_XBGR8888, DE_VIDEO1 | DE_GRAPHICS1 | DE_GRAPHICS2 | SE_MEMWRITE, 5 },
{ DRM_FORMAT_RGB888, DE_VIDEO1 | DE_GRAPHICS1 | DE_GRAPHICS2, 6 },
{ DRM_FORMAT_BGR888, DE_VIDEO1 | DE_GRAPHICS1 | DE_GRAPHICS2, 7 },
{ DRM_FORMAT_RGBA5551, DE_VIDEO1 | DE_GRAPHICS1 | DE_GRAPHICS2, 8 },
{ DRM_FORMAT_ABGR1555, DE_VIDEO1 | DE_GRAPHICS1 | DE_GRAPHICS2, 9 },
{ DRM_FORMAT_RGB565, DE_VIDEO1 | DE_GRAPHICS1 | DE_GRAPHICS2, 10 },
{ DRM_FORMAT_BGR565, DE_VIDEO1 | DE_GRAPHICS1 | DE_GRAPHICS2, 11 },
{ DRM_FORMAT_UYVY, DE_VIDEO1, 12 },
{ DRM_FORMAT_YUYV, DE_VIDEO1, 13 },
{ DRM_FORMAT_NV12, DE_VIDEO1 | SE_MEMWRITE, 14 },
{ DRM_FORMAT_YUV420, DE_VIDEO1, 15 },
{ DRM_FORMAT_XYUV8888, DE_VIDEO1, 16 },
/* These are supported with AFBC only */
{ DRM_FORMAT_YUV420_8BIT, DE_VIDEO1, 14 },
{ DRM_FORMAT_VUY888, DE_VIDEO1, 16 },
{ DRM_FORMAT_VUY101010, DE_VIDEO1, 17 },
{ DRM_FORMAT_YUV420_10BIT, DE_VIDEO1, 18 }
};
#define MALIDP_ID(__group, __format) \
((((__group) & 0x7) << 3) | ((__format) & 0x7))
drm/arm/malidp:- Define a common list of AFBC format modifiers supported for DP500, DP550 and DP650 We need to define a common list of format modifiers supported by each of the Mali display processors. The following are the constraints with AFBC:- 1. AFBC is not supported for the formats defined in malidp_hw_format_is_linear_only() 2. Some of the formats are supported only with AFBC modifiers. Thus we have introduced a new function 'malidp_hw_format_is_afbc_only()' which verifies the same. 3. AFBC_FORMAT_MOD_YTR needs to be provided for any RGB format. 4. Formats <= 16bpp cannot support AFBC_FORMAT_MOD_SPLIT. 5. CBR should not be set for non-subsampled formats. 6. SMART layer does not support framebuffer with AFBC modifiers. Return -EINVAL for such a scenario. 7. AFBC_FORMAT_MOD_YTR is not supported for any YUV formats. 8. Formats which are subsampled cannot support AFBC_FORMAT_MOD_SPLIT. However in DP550, YUV_420_10BIT is supported with AFBC_FORMAT_MOD_SPLIT. This feature has been identified with MALIDP_DEVICE_AFBC_YUV_420_10_SUPPORT_SPLIT. 9. In DP550 and DP650, for YUYV, the hardware supports different format-ids to be used with and without AFBC modifier. We have used the feature 'MALIDP_DEVICE_AFBC_YUYV_USE_422_P2' to identify this characteristic. 10. DP500 does not support split mode (ie AFBC_FORMAT_MOD_SPLIT). We have used the feature 'MALIDP_DEVICE_AFBC_SUPPORT_SPLIT' to identify the DPs which support SPLIT mode. 11. DP550 supports YUV420 with split mode. We have defined the feature 'AFBC_SUPPORT_SPLIT_WITH_YUV_420_10' to identify this characteristic. Changes since v1:- - Merged https://patchwork.freedesktop.org/patch/265215/ into this patch - As Liviu pointed out in the last patch, we can pull the checks outside of the 'while (*modifiers != DRM_FORMAT_MOD_INVALID)' loop - Rebased Changes since v3 (series): - Added the ack - Rebased on the latest drm-misc-next Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Link: https://patchwork.freedesktop.org/patch/291762/?series=57895&rev=1
2018-07-17 18:11:09 +07:00
#define AFBC_YUV_422_FORMAT_ID MALIDP_ID(5, 1)
#define MALIDP_COMMON_FORMATS \
/* fourcc, layers supporting the format, internal id */ \
{ DRM_FORMAT_ARGB2101010, DE_VIDEO1 | DE_GRAPHICS1 | DE_VIDEO2 | SE_MEMWRITE, MALIDP_ID(0, 0) }, \
{ DRM_FORMAT_ABGR2101010, DE_VIDEO1 | DE_GRAPHICS1 | DE_VIDEO2 | SE_MEMWRITE, MALIDP_ID(0, 1) }, \
{ DRM_FORMAT_RGBA1010102, DE_VIDEO1 | DE_GRAPHICS1 | DE_VIDEO2 | SE_MEMWRITE, MALIDP_ID(0, 2) }, \
{ DRM_FORMAT_BGRA1010102, DE_VIDEO1 | DE_GRAPHICS1 | DE_VIDEO2 | SE_MEMWRITE, MALIDP_ID(0, 3) }, \
{ DRM_FORMAT_ARGB8888, DE_VIDEO1 | DE_GRAPHICS1 | DE_VIDEO2 | DE_SMART, MALIDP_ID(1, 0) }, \
{ DRM_FORMAT_ABGR8888, DE_VIDEO1 | DE_GRAPHICS1 | DE_VIDEO2 | DE_SMART, MALIDP_ID(1, 1) }, \
{ DRM_FORMAT_RGBA8888, DE_VIDEO1 | DE_GRAPHICS1 | DE_VIDEO2 | DE_SMART, MALIDP_ID(1, 2) }, \
{ DRM_FORMAT_BGRA8888, DE_VIDEO1 | DE_GRAPHICS1 | DE_VIDEO2 | DE_SMART, MALIDP_ID(1, 3) }, \
{ DRM_FORMAT_XRGB8888, DE_VIDEO1 | DE_GRAPHICS1 | DE_VIDEO2 | DE_SMART | SE_MEMWRITE, MALIDP_ID(2, 0) }, \
{ DRM_FORMAT_XBGR8888, DE_VIDEO1 | DE_GRAPHICS1 | DE_VIDEO2 | DE_SMART | SE_MEMWRITE, MALIDP_ID(2, 1) }, \
{ DRM_FORMAT_RGBX8888, DE_VIDEO1 | DE_GRAPHICS1 | DE_VIDEO2 | DE_SMART | SE_MEMWRITE, MALIDP_ID(2, 2) }, \
{ DRM_FORMAT_BGRX8888, DE_VIDEO1 | DE_GRAPHICS1 | DE_VIDEO2 | DE_SMART | SE_MEMWRITE, MALIDP_ID(2, 3) }, \
{ DRM_FORMAT_RGB888, DE_VIDEO1 | DE_GRAPHICS1 | DE_VIDEO2 | SE_MEMWRITE, MALIDP_ID(3, 0) }, \
{ DRM_FORMAT_BGR888, DE_VIDEO1 | DE_GRAPHICS1 | DE_VIDEO2 | SE_MEMWRITE, MALIDP_ID(3, 1) }, \
{ DRM_FORMAT_RGBA5551, DE_VIDEO1 | DE_GRAPHICS1 | DE_VIDEO2, MALIDP_ID(4, 0) }, \
{ DRM_FORMAT_ABGR1555, DE_VIDEO1 | DE_GRAPHICS1 | DE_VIDEO2, MALIDP_ID(4, 1) }, \
{ DRM_FORMAT_RGB565, DE_VIDEO1 | DE_GRAPHICS1 | DE_VIDEO2, MALIDP_ID(4, 2) }, \
{ DRM_FORMAT_BGR565, DE_VIDEO1 | DE_GRAPHICS1 | DE_VIDEO2, MALIDP_ID(4, 3) }, \
/* This is only supported with linear modifier */ \
{ DRM_FORMAT_XYUV8888, DE_VIDEO1 | DE_VIDEO2, MALIDP_ID(5, 0) },\
/* This is only supported with AFBC modifier */ \
{ DRM_FORMAT_VUY888, DE_VIDEO1 | DE_VIDEO2, MALIDP_ID(5, 0) }, \
{ DRM_FORMAT_YUYV, DE_VIDEO1 | DE_VIDEO2, MALIDP_ID(5, 2) }, \
/* This is only supported with linear modifier */ \
{ DRM_FORMAT_UYVY, DE_VIDEO1 | DE_VIDEO2, MALIDP_ID(5, 3) }, \
{ DRM_FORMAT_NV12, DE_VIDEO1 | DE_VIDEO2 | SE_MEMWRITE, MALIDP_ID(5, 6) }, \
/* This is only supported with AFBC modifier */ \
{ DRM_FORMAT_YUV420_8BIT, DE_VIDEO1 | DE_VIDEO2, MALIDP_ID(5, 6) }, \
{ DRM_FORMAT_YUV420, DE_VIDEO1 | DE_VIDEO2, MALIDP_ID(5, 7) }, \
/* This is only supported with linear modifier */ \
{ DRM_FORMAT_XVYU2101010, DE_VIDEO1 | DE_VIDEO2, MALIDP_ID(6, 0)}, \
/* This is only supported with AFBC modifier */ \
{ DRM_FORMAT_VUY101010, DE_VIDEO1 | DE_VIDEO2, MALIDP_ID(6, 0)}, \
{ DRM_FORMAT_X0L2, DE_VIDEO1 | DE_VIDEO2, MALIDP_ID(6, 6)}, \
/* This is only supported with AFBC modifier */ \
{ DRM_FORMAT_YUV420_10BIT, DE_VIDEO1 | DE_VIDEO2, MALIDP_ID(6, 7)}, \
{ DRM_FORMAT_P010, DE_VIDEO1 | DE_VIDEO2, MALIDP_ID(6, 7)}
static const struct malidp_format_id malidp550_de_formats[] = {
MALIDP_COMMON_FORMATS,
};
static const struct malidp_format_id malidp650_de_formats[] = {
MALIDP_COMMON_FORMATS,
{ DRM_FORMAT_X0L0, DE_VIDEO1 | DE_VIDEO2, MALIDP_ID(5, 4)},
};
static const struct malidp_layer malidp500_layers[] = {
/* id, base address, fb pointer address base, stride offset,
* yuv2rgb matrix offset, mmu control register offset, rotation_features
*/
{ DE_VIDEO1, MALIDP500_DE_LV_BASE, MALIDP500_DE_LV_PTR_BASE,
drm/arm/malidp: Set the AFBC register bits if the framebuffer has AFBC modifier Added the AFBC decoder registers for DP500 , DP550 and DP650. These registers control the processing of AFBC buffers. It controls various features like AFBC decoder enable, lossless transformation and block split as well as setting of the left, right, top and bottom cropping of AFBC buffers (in number of pixels). All the layers (except DE_SMART) support framebuffers with AFBC modifiers. One needs to set the pixel values of the top, left, bottom and right cropping for the AFBC framebuffer. Cropping an AFBC framebuffer is controlled by the AFBC crop registers. In that case, the layer input size registers should be configured with framebuffer's dimensions and not with drm_plane_state source width/height values (which is used for non AFBC framebuffer to denote cropping). Changes from v1: - Removed the "if (fb->modifier)" check from malidp_de_plane_update() and added it in malidp_de_set_plane_afbc(). This will consolidate all the AFBC specific register configurations in a single function ie malidp_de_set_plane_afbc(). Changes from v2: - For AFBC framebuffer, layer input size register should be set to framebuffer's width and height. Changes from v3: - Rebased on top of latest drm-misc-next - Some cleanups/sanity changes based on Liviu's comments Changes from v3 (series): - Added the ack - Rebased on the latest drm-misc-next Signed-off-by: Ayan Kumar Halder <ayan.halder@arm.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Link: https://patchwork.freedesktop.org/patch/291760/?series=57895&rev=1
2018-05-17 01:23:08 +07:00
MALIDP_DE_LV_STRIDE0, MALIDP500_LV_YUV2RGB, 0, ROTATE_ANY,
MALIDP500_DE_LV_AD_CTRL },
{ DE_GRAPHICS1, MALIDP500_DE_LG1_BASE, MALIDP500_DE_LG1_PTR_BASE,
drm/arm/malidp: Set the AFBC register bits if the framebuffer has AFBC modifier Added the AFBC decoder registers for DP500 , DP550 and DP650. These registers control the processing of AFBC buffers. It controls various features like AFBC decoder enable, lossless transformation and block split as well as setting of the left, right, top and bottom cropping of AFBC buffers (in number of pixels). All the layers (except DE_SMART) support framebuffers with AFBC modifiers. One needs to set the pixel values of the top, left, bottom and right cropping for the AFBC framebuffer. Cropping an AFBC framebuffer is controlled by the AFBC crop registers. In that case, the layer input size registers should be configured with framebuffer's dimensions and not with drm_plane_state source width/height values (which is used for non AFBC framebuffer to denote cropping). Changes from v1: - Removed the "if (fb->modifier)" check from malidp_de_plane_update() and added it in malidp_de_set_plane_afbc(). This will consolidate all the AFBC specific register configurations in a single function ie malidp_de_set_plane_afbc(). Changes from v2: - For AFBC framebuffer, layer input size register should be set to framebuffer's width and height. Changes from v3: - Rebased on top of latest drm-misc-next - Some cleanups/sanity changes based on Liviu's comments Changes from v3 (series): - Added the ack - Rebased on the latest drm-misc-next Signed-off-by: Ayan Kumar Halder <ayan.halder@arm.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Link: https://patchwork.freedesktop.org/patch/291760/?series=57895&rev=1
2018-05-17 01:23:08 +07:00
MALIDP_DE_LG_STRIDE, 0, 0, ROTATE_ANY,
MALIDP500_DE_LG1_AD_CTRL },
{ DE_GRAPHICS2, MALIDP500_DE_LG2_BASE, MALIDP500_DE_LG2_PTR_BASE,
drm/arm/malidp: Set the AFBC register bits if the framebuffer has AFBC modifier Added the AFBC decoder registers for DP500 , DP550 and DP650. These registers control the processing of AFBC buffers. It controls various features like AFBC decoder enable, lossless transformation and block split as well as setting of the left, right, top and bottom cropping of AFBC buffers (in number of pixels). All the layers (except DE_SMART) support framebuffers with AFBC modifiers. One needs to set the pixel values of the top, left, bottom and right cropping for the AFBC framebuffer. Cropping an AFBC framebuffer is controlled by the AFBC crop registers. In that case, the layer input size registers should be configured with framebuffer's dimensions and not with drm_plane_state source width/height values (which is used for non AFBC framebuffer to denote cropping). Changes from v1: - Removed the "if (fb->modifier)" check from malidp_de_plane_update() and added it in malidp_de_set_plane_afbc(). This will consolidate all the AFBC specific register configurations in a single function ie malidp_de_set_plane_afbc(). Changes from v2: - For AFBC framebuffer, layer input size register should be set to framebuffer's width and height. Changes from v3: - Rebased on top of latest drm-misc-next - Some cleanups/sanity changes based on Liviu's comments Changes from v3 (series): - Added the ack - Rebased on the latest drm-misc-next Signed-off-by: Ayan Kumar Halder <ayan.halder@arm.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Link: https://patchwork.freedesktop.org/patch/291760/?series=57895&rev=1
2018-05-17 01:23:08 +07:00
MALIDP_DE_LG_STRIDE, 0, 0, ROTATE_ANY,
MALIDP500_DE_LG2_AD_CTRL },
};
static const struct malidp_layer malidp550_layers[] = {
/* id, base address, fb pointer address base, stride offset,
* yuv2rgb matrix offset, mmu control register offset, rotation_features
*/
{ DE_VIDEO1, MALIDP550_DE_LV1_BASE, MALIDP550_DE_LV1_PTR_BASE,
drm/arm/malidp: Set the AFBC register bits if the framebuffer has AFBC modifier Added the AFBC decoder registers for DP500 , DP550 and DP650. These registers control the processing of AFBC buffers. It controls various features like AFBC decoder enable, lossless transformation and block split as well as setting of the left, right, top and bottom cropping of AFBC buffers (in number of pixels). All the layers (except DE_SMART) support framebuffers with AFBC modifiers. One needs to set the pixel values of the top, left, bottom and right cropping for the AFBC framebuffer. Cropping an AFBC framebuffer is controlled by the AFBC crop registers. In that case, the layer input size registers should be configured with framebuffer's dimensions and not with drm_plane_state source width/height values (which is used for non AFBC framebuffer to denote cropping). Changes from v1: - Removed the "if (fb->modifier)" check from malidp_de_plane_update() and added it in malidp_de_set_plane_afbc(). This will consolidate all the AFBC specific register configurations in a single function ie malidp_de_set_plane_afbc(). Changes from v2: - For AFBC framebuffer, layer input size register should be set to framebuffer's width and height. Changes from v3: - Rebased on top of latest drm-misc-next - Some cleanups/sanity changes based on Liviu's comments Changes from v3 (series): - Added the ack - Rebased on the latest drm-misc-next Signed-off-by: Ayan Kumar Halder <ayan.halder@arm.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Link: https://patchwork.freedesktop.org/patch/291760/?series=57895&rev=1
2018-05-17 01:23:08 +07:00
MALIDP_DE_LV_STRIDE0, MALIDP550_LV_YUV2RGB, 0, ROTATE_ANY,
MALIDP550_DE_LV1_AD_CTRL },
{ DE_GRAPHICS1, MALIDP550_DE_LG_BASE, MALIDP550_DE_LG_PTR_BASE,
drm/arm/malidp: Set the AFBC register bits if the framebuffer has AFBC modifier Added the AFBC decoder registers for DP500 , DP550 and DP650. These registers control the processing of AFBC buffers. It controls various features like AFBC decoder enable, lossless transformation and block split as well as setting of the left, right, top and bottom cropping of AFBC buffers (in number of pixels). All the layers (except DE_SMART) support framebuffers with AFBC modifiers. One needs to set the pixel values of the top, left, bottom and right cropping for the AFBC framebuffer. Cropping an AFBC framebuffer is controlled by the AFBC crop registers. In that case, the layer input size registers should be configured with framebuffer's dimensions and not with drm_plane_state source width/height values (which is used for non AFBC framebuffer to denote cropping). Changes from v1: - Removed the "if (fb->modifier)" check from malidp_de_plane_update() and added it in malidp_de_set_plane_afbc(). This will consolidate all the AFBC specific register configurations in a single function ie malidp_de_set_plane_afbc(). Changes from v2: - For AFBC framebuffer, layer input size register should be set to framebuffer's width and height. Changes from v3: - Rebased on top of latest drm-misc-next - Some cleanups/sanity changes based on Liviu's comments Changes from v3 (series): - Added the ack - Rebased on the latest drm-misc-next Signed-off-by: Ayan Kumar Halder <ayan.halder@arm.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Link: https://patchwork.freedesktop.org/patch/291760/?series=57895&rev=1
2018-05-17 01:23:08 +07:00
MALIDP_DE_LG_STRIDE, 0, 0, ROTATE_ANY,
MALIDP550_DE_LG_AD_CTRL },
{ DE_VIDEO2, MALIDP550_DE_LV2_BASE, MALIDP550_DE_LV2_PTR_BASE,
drm/arm/malidp: Set the AFBC register bits if the framebuffer has AFBC modifier Added the AFBC decoder registers for DP500 , DP550 and DP650. These registers control the processing of AFBC buffers. It controls various features like AFBC decoder enable, lossless transformation and block split as well as setting of the left, right, top and bottom cropping of AFBC buffers (in number of pixels). All the layers (except DE_SMART) support framebuffers with AFBC modifiers. One needs to set the pixel values of the top, left, bottom and right cropping for the AFBC framebuffer. Cropping an AFBC framebuffer is controlled by the AFBC crop registers. In that case, the layer input size registers should be configured with framebuffer's dimensions and not with drm_plane_state source width/height values (which is used for non AFBC framebuffer to denote cropping). Changes from v1: - Removed the "if (fb->modifier)" check from malidp_de_plane_update() and added it in malidp_de_set_plane_afbc(). This will consolidate all the AFBC specific register configurations in a single function ie malidp_de_set_plane_afbc(). Changes from v2: - For AFBC framebuffer, layer input size register should be set to framebuffer's width and height. Changes from v3: - Rebased on top of latest drm-misc-next - Some cleanups/sanity changes based on Liviu's comments Changes from v3 (series): - Added the ack - Rebased on the latest drm-misc-next Signed-off-by: Ayan Kumar Halder <ayan.halder@arm.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Link: https://patchwork.freedesktop.org/patch/291760/?series=57895&rev=1
2018-05-17 01:23:08 +07:00
MALIDP_DE_LV_STRIDE0, MALIDP550_LV_YUV2RGB, 0, ROTATE_ANY,
MALIDP550_DE_LV2_AD_CTRL },
{ DE_SMART, MALIDP550_DE_LS_BASE, MALIDP550_DE_LS_PTR_BASE,
drm/arm/malidp: Set the AFBC register bits if the framebuffer has AFBC modifier Added the AFBC decoder registers for DP500 , DP550 and DP650. These registers control the processing of AFBC buffers. It controls various features like AFBC decoder enable, lossless transformation and block split as well as setting of the left, right, top and bottom cropping of AFBC buffers (in number of pixels). All the layers (except DE_SMART) support framebuffers with AFBC modifiers. One needs to set the pixel values of the top, left, bottom and right cropping for the AFBC framebuffer. Cropping an AFBC framebuffer is controlled by the AFBC crop registers. In that case, the layer input size registers should be configured with framebuffer's dimensions and not with drm_plane_state source width/height values (which is used for non AFBC framebuffer to denote cropping). Changes from v1: - Removed the "if (fb->modifier)" check from malidp_de_plane_update() and added it in malidp_de_set_plane_afbc(). This will consolidate all the AFBC specific register configurations in a single function ie malidp_de_set_plane_afbc(). Changes from v2: - For AFBC framebuffer, layer input size register should be set to framebuffer's width and height. Changes from v3: - Rebased on top of latest drm-misc-next - Some cleanups/sanity changes based on Liviu's comments Changes from v3 (series): - Added the ack - Rebased on the latest drm-misc-next Signed-off-by: Ayan Kumar Halder <ayan.halder@arm.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Link: https://patchwork.freedesktop.org/patch/291760/?series=57895&rev=1
2018-05-17 01:23:08 +07:00
MALIDP550_DE_LS_R1_STRIDE, 0, 0, ROTATE_NONE, 0 },
};
static const struct malidp_layer malidp650_layers[] = {
/* id, base address, fb pointer address base, stride offset,
* yuv2rgb matrix offset, mmu control register offset,
* rotation_features
*/
{ DE_VIDEO1, MALIDP550_DE_LV1_BASE, MALIDP550_DE_LV1_PTR_BASE,
MALIDP_DE_LV_STRIDE0, MALIDP550_LV_YUV2RGB,
drm/arm/malidp: Set the AFBC register bits if the framebuffer has AFBC modifier Added the AFBC decoder registers for DP500 , DP550 and DP650. These registers control the processing of AFBC buffers. It controls various features like AFBC decoder enable, lossless transformation and block split as well as setting of the left, right, top and bottom cropping of AFBC buffers (in number of pixels). All the layers (except DE_SMART) support framebuffers with AFBC modifiers. One needs to set the pixel values of the top, left, bottom and right cropping for the AFBC framebuffer. Cropping an AFBC framebuffer is controlled by the AFBC crop registers. In that case, the layer input size registers should be configured with framebuffer's dimensions and not with drm_plane_state source width/height values (which is used for non AFBC framebuffer to denote cropping). Changes from v1: - Removed the "if (fb->modifier)" check from malidp_de_plane_update() and added it in malidp_de_set_plane_afbc(). This will consolidate all the AFBC specific register configurations in a single function ie malidp_de_set_plane_afbc(). Changes from v2: - For AFBC framebuffer, layer input size register should be set to framebuffer's width and height. Changes from v3: - Rebased on top of latest drm-misc-next - Some cleanups/sanity changes based on Liviu's comments Changes from v3 (series): - Added the ack - Rebased on the latest drm-misc-next Signed-off-by: Ayan Kumar Halder <ayan.halder@arm.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Link: https://patchwork.freedesktop.org/patch/291760/?series=57895&rev=1
2018-05-17 01:23:08 +07:00
MALIDP650_DE_LV_MMU_CTRL, ROTATE_ANY,
MALIDP550_DE_LV1_AD_CTRL },
{ DE_GRAPHICS1, MALIDP550_DE_LG_BASE, MALIDP550_DE_LG_PTR_BASE,
MALIDP_DE_LG_STRIDE, 0, MALIDP650_DE_LG_MMU_CTRL,
drm/arm/malidp: Set the AFBC register bits if the framebuffer has AFBC modifier Added the AFBC decoder registers for DP500 , DP550 and DP650. These registers control the processing of AFBC buffers. It controls various features like AFBC decoder enable, lossless transformation and block split as well as setting of the left, right, top and bottom cropping of AFBC buffers (in number of pixels). All the layers (except DE_SMART) support framebuffers with AFBC modifiers. One needs to set the pixel values of the top, left, bottom and right cropping for the AFBC framebuffer. Cropping an AFBC framebuffer is controlled by the AFBC crop registers. In that case, the layer input size registers should be configured with framebuffer's dimensions and not with drm_plane_state source width/height values (which is used for non AFBC framebuffer to denote cropping). Changes from v1: - Removed the "if (fb->modifier)" check from malidp_de_plane_update() and added it in malidp_de_set_plane_afbc(). This will consolidate all the AFBC specific register configurations in a single function ie malidp_de_set_plane_afbc(). Changes from v2: - For AFBC framebuffer, layer input size register should be set to framebuffer's width and height. Changes from v3: - Rebased on top of latest drm-misc-next - Some cleanups/sanity changes based on Liviu's comments Changes from v3 (series): - Added the ack - Rebased on the latest drm-misc-next Signed-off-by: Ayan Kumar Halder <ayan.halder@arm.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Link: https://patchwork.freedesktop.org/patch/291760/?series=57895&rev=1
2018-05-17 01:23:08 +07:00
ROTATE_COMPRESSED, MALIDP550_DE_LG_AD_CTRL },
{ DE_VIDEO2, MALIDP550_DE_LV2_BASE, MALIDP550_DE_LV2_PTR_BASE,
MALIDP_DE_LV_STRIDE0, MALIDP550_LV_YUV2RGB,
drm/arm/malidp: Set the AFBC register bits if the framebuffer has AFBC modifier Added the AFBC decoder registers for DP500 , DP550 and DP650. These registers control the processing of AFBC buffers. It controls various features like AFBC decoder enable, lossless transformation and block split as well as setting of the left, right, top and bottom cropping of AFBC buffers (in number of pixels). All the layers (except DE_SMART) support framebuffers with AFBC modifiers. One needs to set the pixel values of the top, left, bottom and right cropping for the AFBC framebuffer. Cropping an AFBC framebuffer is controlled by the AFBC crop registers. In that case, the layer input size registers should be configured with framebuffer's dimensions and not with drm_plane_state source width/height values (which is used for non AFBC framebuffer to denote cropping). Changes from v1: - Removed the "if (fb->modifier)" check from malidp_de_plane_update() and added it in malidp_de_set_plane_afbc(). This will consolidate all the AFBC specific register configurations in a single function ie malidp_de_set_plane_afbc(). Changes from v2: - For AFBC framebuffer, layer input size register should be set to framebuffer's width and height. Changes from v3: - Rebased on top of latest drm-misc-next - Some cleanups/sanity changes based on Liviu's comments Changes from v3 (series): - Added the ack - Rebased on the latest drm-misc-next Signed-off-by: Ayan Kumar Halder <ayan.halder@arm.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Link: https://patchwork.freedesktop.org/patch/291760/?series=57895&rev=1
2018-05-17 01:23:08 +07:00
MALIDP650_DE_LV_MMU_CTRL, ROTATE_ANY,
MALIDP550_DE_LV2_AD_CTRL },
{ DE_SMART, MALIDP550_DE_LS_BASE, MALIDP550_DE_LS_PTR_BASE,
MALIDP550_DE_LS_R1_STRIDE, 0, MALIDP650_DE_LS_MMU_CTRL,
drm/arm/malidp: Set the AFBC register bits if the framebuffer has AFBC modifier Added the AFBC decoder registers for DP500 , DP550 and DP650. These registers control the processing of AFBC buffers. It controls various features like AFBC decoder enable, lossless transformation and block split as well as setting of the left, right, top and bottom cropping of AFBC buffers (in number of pixels). All the layers (except DE_SMART) support framebuffers with AFBC modifiers. One needs to set the pixel values of the top, left, bottom and right cropping for the AFBC framebuffer. Cropping an AFBC framebuffer is controlled by the AFBC crop registers. In that case, the layer input size registers should be configured with framebuffer's dimensions and not with drm_plane_state source width/height values (which is used for non AFBC framebuffer to denote cropping). Changes from v1: - Removed the "if (fb->modifier)" check from malidp_de_plane_update() and added it in malidp_de_set_plane_afbc(). This will consolidate all the AFBC specific register configurations in a single function ie malidp_de_set_plane_afbc(). Changes from v2: - For AFBC framebuffer, layer input size register should be set to framebuffer's width and height. Changes from v3: - Rebased on top of latest drm-misc-next - Some cleanups/sanity changes based on Liviu's comments Changes from v3 (series): - Added the ack - Rebased on the latest drm-misc-next Signed-off-by: Ayan Kumar Halder <ayan.halder@arm.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Link: https://patchwork.freedesktop.org/patch/291760/?series=57895&rev=1
2018-05-17 01:23:08 +07:00
ROTATE_NONE, 0 },
};
drm/arm/malidp:- Define a common list of AFBC format modifiers supported for DP500, DP550 and DP650 We need to define a common list of format modifiers supported by each of the Mali display processors. The following are the constraints with AFBC:- 1. AFBC is not supported for the formats defined in malidp_hw_format_is_linear_only() 2. Some of the formats are supported only with AFBC modifiers. Thus we have introduced a new function 'malidp_hw_format_is_afbc_only()' which verifies the same. 3. AFBC_FORMAT_MOD_YTR needs to be provided for any RGB format. 4. Formats <= 16bpp cannot support AFBC_FORMAT_MOD_SPLIT. 5. CBR should not be set for non-subsampled formats. 6. SMART layer does not support framebuffer with AFBC modifiers. Return -EINVAL for such a scenario. 7. AFBC_FORMAT_MOD_YTR is not supported for any YUV formats. 8. Formats which are subsampled cannot support AFBC_FORMAT_MOD_SPLIT. However in DP550, YUV_420_10BIT is supported with AFBC_FORMAT_MOD_SPLIT. This feature has been identified with MALIDP_DEVICE_AFBC_YUV_420_10_SUPPORT_SPLIT. 9. In DP550 and DP650, for YUYV, the hardware supports different format-ids to be used with and without AFBC modifier. We have used the feature 'MALIDP_DEVICE_AFBC_YUYV_USE_422_P2' to identify this characteristic. 10. DP500 does not support split mode (ie AFBC_FORMAT_MOD_SPLIT). We have used the feature 'MALIDP_DEVICE_AFBC_SUPPORT_SPLIT' to identify the DPs which support SPLIT mode. 11. DP550 supports YUV420 with split mode. We have defined the feature 'AFBC_SUPPORT_SPLIT_WITH_YUV_420_10' to identify this characteristic. Changes since v1:- - Merged https://patchwork.freedesktop.org/patch/265215/ into this patch - As Liviu pointed out in the last patch, we can pull the checks outside of the 'while (*modifiers != DRM_FORMAT_MOD_INVALID)' loop - Rebased Changes since v3 (series): - Added the ack - Rebased on the latest drm-misc-next Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Link: https://patchwork.freedesktop.org/patch/291762/?series=57895&rev=1
2018-07-17 18:11:09 +07:00
const u64 malidp_format_modifiers[] = {
/* All RGB formats (except XRGB, RGBX, XBGR, BGRX) */
DRM_FORMAT_MOD_ARM_AFBC(AFBC_SIZE_16X16 | AFBC_YTR | AFBC_SPARSE),
DRM_FORMAT_MOD_ARM_AFBC(AFBC_SIZE_16X16 | AFBC_YTR),
/* All RGB formats > 16bpp (except XRGB, RGBX, XBGR, BGRX) */
DRM_FORMAT_MOD_ARM_AFBC(AFBC_SIZE_16X16 | AFBC_YTR | AFBC_SPARSE | AFBC_SPLIT),
/* All 8 or 10 bit YUV 444 formats. */
/* In DP550, 10 bit YUV 420 format also supported */
DRM_FORMAT_MOD_ARM_AFBC(AFBC_SIZE_16X16 | AFBC_SPARSE | AFBC_SPLIT),
/* YUV 420, 422 P1 8 bit and YUV 444 8 bit/10 bit formats */
DRM_FORMAT_MOD_ARM_AFBC(AFBC_SIZE_16X16 | AFBC_SPARSE),
DRM_FORMAT_MOD_ARM_AFBC(AFBC_SIZE_16X16),
/* YUV 420, 422 P1 8, 10 bit formats */
DRM_FORMAT_MOD_ARM_AFBC(AFBC_SIZE_16X16 | AFBC_CBR | AFBC_SPARSE),
DRM_FORMAT_MOD_ARM_AFBC(AFBC_SIZE_16X16 | AFBC_CBR),
/* All formats */
DRM_FORMAT_MOD_LINEAR,
DRM_FORMAT_MOD_INVALID
};
#define SE_N_SCALING_COEFFS 96
static const u16 dp500_se_scaling_coeffs[][SE_N_SCALING_COEFFS] = {
[MALIDP_UPSCALING_COEFFS - 1] = {
0x0000, 0x0001, 0x0007, 0x0011, 0x001e, 0x002e, 0x003f, 0x0052,
0x0064, 0x0073, 0x007d, 0x0080, 0x007a, 0x006c, 0x0053, 0x002f,
0x0000, 0x3fc6, 0x3f83, 0x3f39, 0x3eea, 0x3e9b, 0x3e4f, 0x3e0a,
0x3dd4, 0x3db0, 0x3da2, 0x3db1, 0x3dde, 0x3e2f, 0x3ea5, 0x3f40,
0x0000, 0x00e5, 0x01ee, 0x0315, 0x0456, 0x05aa, 0x0709, 0x086c,
0x09c9, 0x0b15, 0x0c4a, 0x0d5d, 0x0e4a, 0x0f06, 0x0f91, 0x0fe5,
0x1000, 0x0fe5, 0x0f91, 0x0f06, 0x0e4a, 0x0d5d, 0x0c4a, 0x0b15,
0x09c9, 0x086c, 0x0709, 0x05aa, 0x0456, 0x0315, 0x01ee, 0x00e5,
0x0000, 0x3f40, 0x3ea5, 0x3e2f, 0x3dde, 0x3db1, 0x3da2, 0x3db0,
0x3dd4, 0x3e0a, 0x3e4f, 0x3e9b, 0x3eea, 0x3f39, 0x3f83, 0x3fc6,
0x0000, 0x002f, 0x0053, 0x006c, 0x007a, 0x0080, 0x007d, 0x0073,
0x0064, 0x0052, 0x003f, 0x002e, 0x001e, 0x0011, 0x0007, 0x0001
},
[MALIDP_DOWNSCALING_1_5_COEFFS - 1] = {
0x0059, 0x004f, 0x0041, 0x002e, 0x0016, 0x3ffb, 0x3fd9, 0x3fb4,
0x3f8c, 0x3f62, 0x3f36, 0x3f09, 0x3edd, 0x3eb3, 0x3e8d, 0x3e6c,
0x3e52, 0x3e3f, 0x3e35, 0x3e37, 0x3e46, 0x3e61, 0x3e8c, 0x3ec5,
0x3f0f, 0x3f68, 0x3fd1, 0x004a, 0x00d3, 0x0169, 0x020b, 0x02b8,
0x036e, 0x042d, 0x04f2, 0x05b9, 0x0681, 0x0745, 0x0803, 0x08ba,
0x0965, 0x0a03, 0x0a91, 0x0b0d, 0x0b75, 0x0bc6, 0x0c00, 0x0c20,
0x0c28, 0x0c20, 0x0c00, 0x0bc6, 0x0b75, 0x0b0d, 0x0a91, 0x0a03,
0x0965, 0x08ba, 0x0803, 0x0745, 0x0681, 0x05b9, 0x04f2, 0x042d,
0x036e, 0x02b8, 0x020b, 0x0169, 0x00d3, 0x004a, 0x3fd1, 0x3f68,
0x3f0f, 0x3ec5, 0x3e8c, 0x3e61, 0x3e46, 0x3e37, 0x3e35, 0x3e3f,
0x3e52, 0x3e6c, 0x3e8d, 0x3eb3, 0x3edd, 0x3f09, 0x3f36, 0x3f62,
0x3f8c, 0x3fb4, 0x3fd9, 0x3ffb, 0x0016, 0x002e, 0x0041, 0x004f
},
[MALIDP_DOWNSCALING_2_COEFFS - 1] = {
0x3f19, 0x3f03, 0x3ef0, 0x3edf, 0x3ed0, 0x3ec5, 0x3ebd, 0x3eb9,
0x3eb9, 0x3ebf, 0x3eca, 0x3ed9, 0x3eef, 0x3f0a, 0x3f2c, 0x3f52,
0x3f7f, 0x3fb0, 0x3fe8, 0x0026, 0x006a, 0x00b4, 0x0103, 0x0158,
0x01b1, 0x020d, 0x026c, 0x02cd, 0x032f, 0x0392, 0x03f4, 0x0455,
0x04b4, 0x051e, 0x0585, 0x05eb, 0x064c, 0x06a8, 0x06fe, 0x074e,
0x0796, 0x07d5, 0x080c, 0x0839, 0x085c, 0x0875, 0x0882, 0x0887,
0x0881, 0x0887, 0x0882, 0x0875, 0x085c, 0x0839, 0x080c, 0x07d5,
0x0796, 0x074e, 0x06fe, 0x06a8, 0x064c, 0x05eb, 0x0585, 0x051e,
0x04b4, 0x0455, 0x03f4, 0x0392, 0x032f, 0x02cd, 0x026c, 0x020d,
0x01b1, 0x0158, 0x0103, 0x00b4, 0x006a, 0x0026, 0x3fe8, 0x3fb0,
0x3f7f, 0x3f52, 0x3f2c, 0x3f0a, 0x3eef, 0x3ed9, 0x3eca, 0x3ebf,
0x3eb9, 0x3eb9, 0x3ebd, 0x3ec5, 0x3ed0, 0x3edf, 0x3ef0, 0x3f03
},
[MALIDP_DOWNSCALING_2_75_COEFFS - 1] = {
0x3f51, 0x3f60, 0x3f71, 0x3f84, 0x3f98, 0x3faf, 0x3fc8, 0x3fe3,
0x0000, 0x001f, 0x0040, 0x0064, 0x008a, 0x00b1, 0x00da, 0x0106,
0x0133, 0x0160, 0x018e, 0x01bd, 0x01ec, 0x021d, 0x024e, 0x0280,
0x02b2, 0x02e4, 0x0317, 0x0349, 0x037c, 0x03ad, 0x03df, 0x0410,
0x0440, 0x0468, 0x048f, 0x04b3, 0x04d6, 0x04f8, 0x0516, 0x0533,
0x054e, 0x0566, 0x057c, 0x0590, 0x05a0, 0x05ae, 0x05ba, 0x05c3,
0x05c9, 0x05c3, 0x05ba, 0x05ae, 0x05a0, 0x0590, 0x057c, 0x0566,
0x054e, 0x0533, 0x0516, 0x04f8, 0x04d6, 0x04b3, 0x048f, 0x0468,
0x0440, 0x0410, 0x03df, 0x03ad, 0x037c, 0x0349, 0x0317, 0x02e4,
0x02b2, 0x0280, 0x024e, 0x021d, 0x01ec, 0x01bd, 0x018e, 0x0160,
0x0133, 0x0106, 0x00da, 0x00b1, 0x008a, 0x0064, 0x0040, 0x001f,
0x0000, 0x3fe3, 0x3fc8, 0x3faf, 0x3f98, 0x3f84, 0x3f71, 0x3f60
},
[MALIDP_DOWNSCALING_4_COEFFS - 1] = {
0x0094, 0x00a9, 0x00be, 0x00d4, 0x00ea, 0x0101, 0x0118, 0x012f,
0x0148, 0x0160, 0x017a, 0x0193, 0x01ae, 0x01c8, 0x01e4, 0x01ff,
0x021c, 0x0233, 0x024a, 0x0261, 0x0278, 0x028f, 0x02a6, 0x02bd,
0x02d4, 0x02eb, 0x0302, 0x0319, 0x032f, 0x0346, 0x035d, 0x0374,
0x038a, 0x0397, 0x03a3, 0x03af, 0x03bb, 0x03c6, 0x03d1, 0x03db,
0x03e4, 0x03ed, 0x03f6, 0x03fe, 0x0406, 0x040d, 0x0414, 0x041a,
0x0420, 0x041a, 0x0414, 0x040d, 0x0406, 0x03fe, 0x03f6, 0x03ed,
0x03e4, 0x03db, 0x03d1, 0x03c6, 0x03bb, 0x03af, 0x03a3, 0x0397,
0x038a, 0x0374, 0x035d, 0x0346, 0x032f, 0x0319, 0x0302, 0x02eb,
0x02d4, 0x02bd, 0x02a6, 0x028f, 0x0278, 0x0261, 0x024a, 0x0233,
0x021c, 0x01ff, 0x01e4, 0x01c8, 0x01ae, 0x0193, 0x017a, 0x0160,
0x0148, 0x012f, 0x0118, 0x0101, 0x00ea, 0x00d4, 0x00be, 0x00a9
},
};
#define MALIDP_DE_DEFAULT_PREFETCH_START 5
static int malidp500_query_hw(struct malidp_hw_device *hwdev)
{
u32 conf = malidp_hw_read(hwdev, MALIDP500_CONFIG_ID);
/* bit 4 of the CONFIG_ID register holds the line size multiplier */
u8 ln_size_mult = conf & 0x10 ? 2 : 1;
hwdev->min_line_size = 2;
hwdev->max_line_size = SZ_2K * ln_size_mult;
hwdev->rotation_memory[0] = SZ_1K * 64 * ln_size_mult;
hwdev->rotation_memory[1] = 0; /* no second rotation memory bank */
return 0;
}
static void malidp500_enter_config_mode(struct malidp_hw_device *hwdev)
{
u32 status, count = 100;
malidp_hw_setbits(hwdev, MALIDP500_DC_CONFIG_REQ, MALIDP500_DC_CONTROL);
while (count) {
status = malidp_hw_read(hwdev, hwdev->hw->map.dc_base + MALIDP_REG_STATUS);
if ((status & MALIDP500_DC_CONFIG_REQ) == MALIDP500_DC_CONFIG_REQ)
break;
/*
* entering config mode can take as long as the rendering
* of a full frame, hence the long sleep here
*/
usleep_range(1000, 10000);
count--;
}
WARN(count == 0, "timeout while entering config mode");
}
static void malidp500_leave_config_mode(struct malidp_hw_device *hwdev)
{
u32 status, count = 100;
malidp_hw_clearbits(hwdev, MALIDP_CFG_VALID, MALIDP500_CONFIG_VALID);
malidp_hw_clearbits(hwdev, MALIDP500_DC_CONFIG_REQ, MALIDP500_DC_CONTROL);
while (count) {
status = malidp_hw_read(hwdev, hwdev->hw->map.dc_base + MALIDP_REG_STATUS);
if ((status & MALIDP500_DC_CONFIG_REQ) == 0)
break;
usleep_range(100, 1000);
count--;
}
WARN(count == 0, "timeout while leaving config mode");
}
static bool malidp500_in_config_mode(struct malidp_hw_device *hwdev)
{
u32 status;
status = malidp_hw_read(hwdev, hwdev->hw->map.dc_base + MALIDP_REG_STATUS);
if ((status & MALIDP500_DC_CONFIG_REQ) == MALIDP500_DC_CONFIG_REQ)
return true;
return false;
}
static void malidp500_set_config_valid(struct malidp_hw_device *hwdev, u8 value)
{
if (value)
malidp_hw_setbits(hwdev, MALIDP_CFG_VALID, MALIDP500_CONFIG_VALID);
else
malidp_hw_clearbits(hwdev, MALIDP_CFG_VALID, MALIDP500_CONFIG_VALID);
}
static void malidp500_modeset(struct malidp_hw_device *hwdev, struct videomode *mode)
{
u32 val = 0;
malidp_hw_write(hwdev, hwdev->output_color_depth,
hwdev->hw->map.out_depth_base);
malidp_hw_clearbits(hwdev, MALIDP500_DC_CLEAR_MASK, MALIDP500_DC_CONTROL);
if (mode->flags & DISPLAY_FLAGS_HSYNC_HIGH)
val |= MALIDP500_HSYNCPOL;
if (mode->flags & DISPLAY_FLAGS_VSYNC_HIGH)
val |= MALIDP500_VSYNCPOL;
val |= MALIDP_DE_DEFAULT_PREFETCH_START;
malidp_hw_setbits(hwdev, val, MALIDP500_DC_CONTROL);
/*
* Mali-DP500 encodes the background color like this:
* - red @ MALIDP500_BGND_COLOR[12:0]
* - green @ MALIDP500_BGND_COLOR[27:16]
* - blue @ (MALIDP500_BGND_COLOR + 4)[12:0]
*/
val = ((MALIDP_BGND_COLOR_G & 0xfff) << 16) |
(MALIDP_BGND_COLOR_R & 0xfff);
malidp_hw_write(hwdev, val, MALIDP500_BGND_COLOR);
malidp_hw_write(hwdev, MALIDP_BGND_COLOR_B, MALIDP500_BGND_COLOR + 4);
val = MALIDP_DE_H_FRONTPORCH(mode->hfront_porch) |
MALIDP_DE_H_BACKPORCH(mode->hback_porch);
malidp_hw_write(hwdev, val, MALIDP500_TIMINGS_BASE + MALIDP_DE_H_TIMINGS);
val = MALIDP500_DE_V_FRONTPORCH(mode->vfront_porch) |
MALIDP_DE_V_BACKPORCH(mode->vback_porch);
malidp_hw_write(hwdev, val, MALIDP500_TIMINGS_BASE + MALIDP_DE_V_TIMINGS);
val = MALIDP_DE_H_SYNCWIDTH(mode->hsync_len) |
MALIDP_DE_V_SYNCWIDTH(mode->vsync_len);
malidp_hw_write(hwdev, val, MALIDP500_TIMINGS_BASE + MALIDP_DE_SYNC_WIDTH);
val = MALIDP_DE_H_ACTIVE(mode->hactive) | MALIDP_DE_V_ACTIVE(mode->vactive);
malidp_hw_write(hwdev, val, MALIDP500_TIMINGS_BASE + MALIDP_DE_HV_ACTIVE);
if (mode->flags & DISPLAY_FLAGS_INTERLACED)
malidp_hw_setbits(hwdev, MALIDP_DISP_FUNC_ILACED, MALIDP_DE_DISPLAY_FUNC);
else
malidp_hw_clearbits(hwdev, MALIDP_DISP_FUNC_ILACED, MALIDP_DE_DISPLAY_FUNC);
}
int malidp_format_get_bpp(u32 fmt)
{
const struct drm_format_info *info = drm_format_info(fmt);
int bpp = info->cpp[0] * 8;
if (bpp == 0) {
switch (fmt) {
case DRM_FORMAT_VUY101010:
bpp = 30;
break;
case DRM_FORMAT_YUV420_10BIT:
bpp = 15;
break;
case DRM_FORMAT_YUV420_8BIT:
bpp = 12;
break;
default:
bpp = 0;
}
}
return bpp;
}
static int malidp500_rotmem_required(struct malidp_hw_device *hwdev, u16 w,
u16 h, u32 fmt, bool has_modifier)
{
/*
* Each layer needs enough rotation memory to fit 8 lines
* worth of pixel data. Required size is then:
* size = rotated_width * (bpp / 8) * 8;
*/
int bpp = malidp_format_get_bpp(fmt);
return w * bpp;
}
static void malidp500_se_write_pp_coefftab(struct malidp_hw_device *hwdev,
u32 direction,
u16 addr,
u8 coeffs_id)
{
int i;
u16 scaling_control = MALIDP500_SE_CONTROL + MALIDP_SE_SCALING_CONTROL;
malidp_hw_write(hwdev,
direction | (addr & MALIDP_SE_COEFFTAB_ADDR_MASK),
scaling_control + MALIDP_SE_COEFFTAB_ADDR);
for (i = 0; i < ARRAY_SIZE(dp500_se_scaling_coeffs); ++i)
malidp_hw_write(hwdev, MALIDP_SE_SET_COEFFTAB_DATA(
dp500_se_scaling_coeffs[coeffs_id][i]),
scaling_control + MALIDP_SE_COEFFTAB_DATA);
}
static int malidp500_se_set_scaling_coeffs(struct malidp_hw_device *hwdev,
struct malidp_se_config *se_config,
struct malidp_se_config *old_config)
{
/* Get array indices into dp500_se_scaling_coeffs. */
u8 h = (u8)se_config->hcoeff - 1;
u8 v = (u8)se_config->vcoeff - 1;
if (WARN_ON(h >= ARRAY_SIZE(dp500_se_scaling_coeffs) ||
v >= ARRAY_SIZE(dp500_se_scaling_coeffs)))
return -EINVAL;
if ((h == v) && (se_config->hcoeff != old_config->hcoeff ||
se_config->vcoeff != old_config->vcoeff)) {
malidp500_se_write_pp_coefftab(hwdev,
(MALIDP_SE_V_COEFFTAB |
MALIDP_SE_H_COEFFTAB),
0, v);
} else {
if (se_config->vcoeff != old_config->vcoeff)
malidp500_se_write_pp_coefftab(hwdev,
MALIDP_SE_V_COEFFTAB,
0, v);
if (se_config->hcoeff != old_config->hcoeff)
malidp500_se_write_pp_coefftab(hwdev,
MALIDP_SE_H_COEFFTAB,
0, h);
}
return 0;
}
static long malidp500_se_calc_mclk(struct malidp_hw_device *hwdev,
struct malidp_se_config *se_config,
struct videomode *vm)
{
unsigned long mclk;
unsigned long pxlclk = vm->pixelclock; /* Hz */
unsigned long htotal = vm->hactive + vm->hfront_porch +
vm->hback_porch + vm->hsync_len;
unsigned long input_size = se_config->input_w * se_config->input_h;
unsigned long a = 10;
long ret;
/*
* mclk = max(a, 1.5) * pxlclk
*
* To avoid float calculaiton, using 15 instead of 1.5 and div by
* 10 to get mclk.
*/
if (se_config->scale_enable) {
a = 15 * input_size / (htotal * se_config->output_h);
if (a < 15)
a = 15;
}
mclk = a * pxlclk / 10;
ret = clk_get_rate(hwdev->mclk);
if (ret < mclk) {
DRM_DEBUG_DRIVER("mclk requirement of %lu kHz can't be met.\n",
mclk / 1000);
return -EINVAL;
}
return ret;
}
static int malidp500_enable_memwrite(struct malidp_hw_device *hwdev,
dma_addr_t *addrs, s32 *pitches,
int num_planes, u16 w, u16 h, u32 fmt_id,
const s16 *rgb2yuv_coeffs)
{
u32 base = MALIDP500_SE_MEMWRITE_BASE;
u32 de_base = malidp_get_block_base(hwdev, MALIDP_DE_BLOCK);
/* enable the scaling engine block */
malidp_hw_setbits(hwdev, MALIDP_SCALE_ENGINE_EN, de_base + MALIDP_DE_DISPLAY_FUNC);
/* restart the writeback if already enabled */
if (hwdev->mw_state != MW_NOT_ENABLED)
hwdev->mw_state = MW_RESTART;
else
hwdev->mw_state = MW_START;
malidp_hw_write(hwdev, fmt_id, base + MALIDP_MW_FORMAT);
switch (num_planes) {
case 2:
malidp_hw_write(hwdev, lower_32_bits(addrs[1]), base + MALIDP_MW_P2_PTR_LOW);
malidp_hw_write(hwdev, upper_32_bits(addrs[1]), base + MALIDP_MW_P2_PTR_HIGH);
malidp_hw_write(hwdev, pitches[1], base + MALIDP_MW_P2_STRIDE);
/* fall through */
case 1:
malidp_hw_write(hwdev, lower_32_bits(addrs[0]), base + MALIDP_MW_P1_PTR_LOW);
malidp_hw_write(hwdev, upper_32_bits(addrs[0]), base + MALIDP_MW_P1_PTR_HIGH);
malidp_hw_write(hwdev, pitches[0], base + MALIDP_MW_P1_STRIDE);
break;
default:
WARN(1, "Invalid number of planes");
}
malidp_hw_write(hwdev, MALIDP_DE_H_ACTIVE(w) | MALIDP_DE_V_ACTIVE(h),
MALIDP500_SE_MEMWRITE_OUT_SIZE);
if (rgb2yuv_coeffs) {
int i;
for (i = 0; i < MALIDP_COLORADJ_NUM_COEFFS; i++) {
malidp_hw_write(hwdev, rgb2yuv_coeffs[i],
MALIDP500_SE_RGB_YUV_COEFFS + i * 4);
}
}
malidp_hw_setbits(hwdev, MALIDP_SE_MEMWRITE_EN, MALIDP500_SE_CONTROL);
return 0;
}
static void malidp500_disable_memwrite(struct malidp_hw_device *hwdev)
{
u32 base = malidp_get_block_base(hwdev, MALIDP_DE_BLOCK);
if (hwdev->mw_state == MW_START || hwdev->mw_state == MW_RESTART)
hwdev->mw_state = MW_STOP;
malidp_hw_clearbits(hwdev, MALIDP_SE_MEMWRITE_EN, MALIDP500_SE_CONTROL);
malidp_hw_clearbits(hwdev, MALIDP_SCALE_ENGINE_EN, base + MALIDP_DE_DISPLAY_FUNC);
}
static int malidp550_query_hw(struct malidp_hw_device *hwdev)
{
u32 conf = malidp_hw_read(hwdev, MALIDP550_CONFIG_ID);
u8 ln_size = (conf >> 4) & 0x3, rsize;
hwdev->min_line_size = 2;
switch (ln_size) {
case 0:
hwdev->max_line_size = SZ_2K;
/* two banks of 64KB for rotation memory */
rsize = 64;
break;
case 1:
hwdev->max_line_size = SZ_4K;
/* two banks of 128KB for rotation memory */
rsize = 128;
break;
case 2:
hwdev->max_line_size = 1280;
/* two banks of 40KB for rotation memory */
rsize = 40;
break;
case 3:
/* reserved value */
hwdev->max_line_size = 0;
return -EINVAL;
}
hwdev->rotation_memory[0] = hwdev->rotation_memory[1] = rsize * SZ_1K;
return 0;
}
static void malidp550_enter_config_mode(struct malidp_hw_device *hwdev)
{
u32 status, count = 100;
malidp_hw_setbits(hwdev, MALIDP550_DC_CONFIG_REQ, MALIDP550_DC_CONTROL);
while (count) {
status = malidp_hw_read(hwdev, hwdev->hw->map.dc_base + MALIDP_REG_STATUS);
if ((status & MALIDP550_DC_CONFIG_REQ) == MALIDP550_DC_CONFIG_REQ)
break;
/*
* entering config mode can take as long as the rendering
* of a full frame, hence the long sleep here
*/
usleep_range(1000, 10000);
count--;
}
WARN(count == 0, "timeout while entering config mode");
}
static void malidp550_leave_config_mode(struct malidp_hw_device *hwdev)
{
u32 status, count = 100;
malidp_hw_clearbits(hwdev, MALIDP_CFG_VALID, MALIDP550_CONFIG_VALID);
malidp_hw_clearbits(hwdev, MALIDP550_DC_CONFIG_REQ, MALIDP550_DC_CONTROL);
while (count) {
status = malidp_hw_read(hwdev, hwdev->hw->map.dc_base + MALIDP_REG_STATUS);
if ((status & MALIDP550_DC_CONFIG_REQ) == 0)
break;
usleep_range(100, 1000);
count--;
}
WARN(count == 0, "timeout while leaving config mode");
}
static bool malidp550_in_config_mode(struct malidp_hw_device *hwdev)
{
u32 status;
status = malidp_hw_read(hwdev, hwdev->hw->map.dc_base + MALIDP_REG_STATUS);
if ((status & MALIDP550_DC_CONFIG_REQ) == MALIDP550_DC_CONFIG_REQ)
return true;
return false;
}
static void malidp550_set_config_valid(struct malidp_hw_device *hwdev, u8 value)
{
if (value)
malidp_hw_setbits(hwdev, MALIDP_CFG_VALID, MALIDP550_CONFIG_VALID);
else
malidp_hw_clearbits(hwdev, MALIDP_CFG_VALID, MALIDP550_CONFIG_VALID);
}
static void malidp550_modeset(struct malidp_hw_device *hwdev, struct videomode *mode)
{
u32 val = MALIDP_DE_DEFAULT_PREFETCH_START;
malidp_hw_write(hwdev, hwdev->output_color_depth,
hwdev->hw->map.out_depth_base);
malidp_hw_write(hwdev, val, MALIDP550_DE_CONTROL);
/*
* Mali-DP550 and Mali-DP650 encode the background color like this:
* - red @ MALIDP550_DE_BGND_COLOR[23:16]
* - green @ MALIDP550_DE_BGND_COLOR[15:8]
* - blue @ MALIDP550_DE_BGND_COLOR[7:0]
*
* We need to truncate the least significant 4 bits from the default
* MALIDP_BGND_COLOR_x values
*/
val = (((MALIDP_BGND_COLOR_R >> 4) & 0xff) << 16) |
(((MALIDP_BGND_COLOR_G >> 4) & 0xff) << 8) |
((MALIDP_BGND_COLOR_B >> 4) & 0xff);
malidp_hw_write(hwdev, val, MALIDP550_DE_BGND_COLOR);
val = MALIDP_DE_H_FRONTPORCH(mode->hfront_porch) |
MALIDP_DE_H_BACKPORCH(mode->hback_porch);
malidp_hw_write(hwdev, val, MALIDP550_TIMINGS_BASE + MALIDP_DE_H_TIMINGS);
val = MALIDP550_DE_V_FRONTPORCH(mode->vfront_porch) |
MALIDP_DE_V_BACKPORCH(mode->vback_porch);
malidp_hw_write(hwdev, val, MALIDP550_TIMINGS_BASE + MALIDP_DE_V_TIMINGS);
val = MALIDP_DE_H_SYNCWIDTH(mode->hsync_len) |
MALIDP_DE_V_SYNCWIDTH(mode->vsync_len);
if (mode->flags & DISPLAY_FLAGS_HSYNC_HIGH)
val |= MALIDP550_HSYNCPOL;
if (mode->flags & DISPLAY_FLAGS_VSYNC_HIGH)
val |= MALIDP550_VSYNCPOL;
malidp_hw_write(hwdev, val, MALIDP550_TIMINGS_BASE + MALIDP_DE_SYNC_WIDTH);
val = MALIDP_DE_H_ACTIVE(mode->hactive) | MALIDP_DE_V_ACTIVE(mode->vactive);
malidp_hw_write(hwdev, val, MALIDP550_TIMINGS_BASE + MALIDP_DE_HV_ACTIVE);
if (mode->flags & DISPLAY_FLAGS_INTERLACED)
malidp_hw_setbits(hwdev, MALIDP_DISP_FUNC_ILACED, MALIDP_DE_DISPLAY_FUNC);
else
malidp_hw_clearbits(hwdev, MALIDP_DISP_FUNC_ILACED, MALIDP_DE_DISPLAY_FUNC);
}
static int malidpx50_get_bytes_per_column(u32 fmt)
{
u32 bytes_per_column;
switch (fmt) {
/* 8 lines at 4 bytes per pixel */
case DRM_FORMAT_ARGB2101010:
case DRM_FORMAT_ABGR2101010:
case DRM_FORMAT_RGBA1010102:
case DRM_FORMAT_BGRA1010102:
case DRM_FORMAT_ARGB8888:
case DRM_FORMAT_ABGR8888:
case DRM_FORMAT_RGBA8888:
case DRM_FORMAT_BGRA8888:
case DRM_FORMAT_XRGB8888:
case DRM_FORMAT_XBGR8888:
case DRM_FORMAT_RGBX8888:
case DRM_FORMAT_BGRX8888:
case DRM_FORMAT_RGB888:
case DRM_FORMAT_BGR888:
/* 16 lines at 2 bytes per pixel */
case DRM_FORMAT_RGBA5551:
case DRM_FORMAT_ABGR1555:
case DRM_FORMAT_RGB565:
case DRM_FORMAT_BGR565:
case DRM_FORMAT_UYVY:
case DRM_FORMAT_YUYV:
case DRM_FORMAT_X0L0:
bytes_per_column = 32;
break;
/* 16 lines at 1.5 bytes per pixel */
case DRM_FORMAT_NV12:
case DRM_FORMAT_YUV420:
/* 8 lines at 3 bytes per pixel */
case DRM_FORMAT_VUY888:
/* 16 lines at 12 bits per pixel */
case DRM_FORMAT_YUV420_8BIT:
/* 8 lines at 3 bytes per pixel */
case DRM_FORMAT_P010:
bytes_per_column = 24;
break;
/* 8 lines at 30 bits per pixel */
case DRM_FORMAT_VUY101010:
/* 16 lines at 15 bits per pixel */
case DRM_FORMAT_YUV420_10BIT:
bytes_per_column = 30;
break;
default:
return -EINVAL;
}
return bytes_per_column;
}
static int malidp550_rotmem_required(struct malidp_hw_device *hwdev, u16 w,
u16 h, u32 fmt, bool has_modifier)
{
int bytes_per_column = 0;
switch (fmt) {
/* 8 lines at 15 bits per pixel */
case DRM_FORMAT_YUV420_10BIT:
bytes_per_column = 15;
break;
/* Uncompressed YUV 420 10 bit single plane cannot be rotated */
case DRM_FORMAT_X0L2:
if (has_modifier)
bytes_per_column = 8;
else
return -EINVAL;
break;
default:
bytes_per_column = malidpx50_get_bytes_per_column(fmt);
}
if (bytes_per_column == -EINVAL)
return bytes_per_column;
return w * bytes_per_column;
}
static int malidp650_rotmem_required(struct malidp_hw_device *hwdev, u16 w,
u16 h, u32 fmt, bool has_modifier)
{
int bytes_per_column = 0;
switch (fmt) {
/* 16 lines at 2 bytes per pixel */
case DRM_FORMAT_X0L2:
bytes_per_column = 32;
break;
default:
bytes_per_column = malidpx50_get_bytes_per_column(fmt);
}
if (bytes_per_column == -EINVAL)
return bytes_per_column;
return w * bytes_per_column;
}
static int malidp550_se_set_scaling_coeffs(struct malidp_hw_device *hwdev,
struct malidp_se_config *se_config,
struct malidp_se_config *old_config)
{
u32 mask = MALIDP550_SE_CTL_VCSEL(MALIDP550_SE_CTL_SEL_MASK) |
MALIDP550_SE_CTL_HCSEL(MALIDP550_SE_CTL_SEL_MASK);
u32 new_value = MALIDP550_SE_CTL_VCSEL(se_config->vcoeff) |
MALIDP550_SE_CTL_HCSEL(se_config->hcoeff);
malidp_hw_clearbits(hwdev, mask, MALIDP550_SE_CONTROL);
malidp_hw_setbits(hwdev, new_value, MALIDP550_SE_CONTROL);
return 0;
}
static long malidp550_se_calc_mclk(struct malidp_hw_device *hwdev,
struct malidp_se_config *se_config,
struct videomode *vm)
{
unsigned long mclk;
unsigned long pxlclk = vm->pixelclock;
unsigned long htotal = vm->hactive + vm->hfront_porch +
vm->hback_porch + vm->hsync_len;
unsigned long numerator = 1, denominator = 1;
long ret;
if (se_config->scale_enable) {
numerator = max(se_config->input_w, se_config->output_w) *
se_config->input_h;
numerator += se_config->output_w *
(se_config->output_h -
min(se_config->input_h, se_config->output_h));
denominator = (htotal - 2) * se_config->output_h;
}
/* mclk can't be slower than pxlclk. */
if (numerator < denominator)
numerator = denominator = 1;
mclk = (pxlclk * numerator) / denominator;
ret = clk_get_rate(hwdev->mclk);
if (ret < mclk) {
DRM_DEBUG_DRIVER("mclk requirement of %lu kHz can't be met.\n",
mclk / 1000);
return -EINVAL;
}
return ret;
}
static int malidp550_enable_memwrite(struct malidp_hw_device *hwdev,
dma_addr_t *addrs, s32 *pitches,
int num_planes, u16 w, u16 h, u32 fmt_id,
const s16 *rgb2yuv_coeffs)
{
u32 base = MALIDP550_SE_MEMWRITE_BASE;
u32 de_base = malidp_get_block_base(hwdev, MALIDP_DE_BLOCK);
/* enable the scaling engine block */
malidp_hw_setbits(hwdev, MALIDP_SCALE_ENGINE_EN, de_base + MALIDP_DE_DISPLAY_FUNC);
hwdev->mw_state = MW_ONESHOT;
malidp_hw_write(hwdev, fmt_id, base + MALIDP_MW_FORMAT);
switch (num_planes) {
case 2:
malidp_hw_write(hwdev, lower_32_bits(addrs[1]), base + MALIDP_MW_P2_PTR_LOW);
malidp_hw_write(hwdev, upper_32_bits(addrs[1]), base + MALIDP_MW_P2_PTR_HIGH);
malidp_hw_write(hwdev, pitches[1], base + MALIDP_MW_P2_STRIDE);
/* fall through */
case 1:
malidp_hw_write(hwdev, lower_32_bits(addrs[0]), base + MALIDP_MW_P1_PTR_LOW);
malidp_hw_write(hwdev, upper_32_bits(addrs[0]), base + MALIDP_MW_P1_PTR_HIGH);
malidp_hw_write(hwdev, pitches[0], base + MALIDP_MW_P1_STRIDE);
break;
default:
WARN(1, "Invalid number of planes");
}
malidp_hw_write(hwdev, MALIDP_DE_H_ACTIVE(w) | MALIDP_DE_V_ACTIVE(h),
MALIDP550_SE_MEMWRITE_OUT_SIZE);
malidp_hw_setbits(hwdev, MALIDP550_SE_MEMWRITE_ONESHOT | MALIDP_SE_MEMWRITE_EN,
MALIDP550_SE_CONTROL);
if (rgb2yuv_coeffs) {
int i;
for (i = 0; i < MALIDP_COLORADJ_NUM_COEFFS; i++) {
malidp_hw_write(hwdev, rgb2yuv_coeffs[i],
MALIDP550_SE_RGB_YUV_COEFFS + i * 4);
}
}
return 0;
}
static void malidp550_disable_memwrite(struct malidp_hw_device *hwdev)
{
u32 base = malidp_get_block_base(hwdev, MALIDP_DE_BLOCK);
malidp_hw_clearbits(hwdev, MALIDP550_SE_MEMWRITE_ONESHOT | MALIDP_SE_MEMWRITE_EN,
MALIDP550_SE_CONTROL);
malidp_hw_clearbits(hwdev, MALIDP_SCALE_ENGINE_EN, base + MALIDP_DE_DISPLAY_FUNC);
}
static int malidp650_query_hw(struct malidp_hw_device *hwdev)
{
u32 conf = malidp_hw_read(hwdev, MALIDP550_CONFIG_ID);
u8 ln_size = (conf >> 4) & 0x3, rsize;
hwdev->min_line_size = 4;
switch (ln_size) {
case 0:
case 2:
/* reserved values */
hwdev->max_line_size = 0;
return -EINVAL;
case 1:
hwdev->max_line_size = SZ_4K;
/* two banks of 128KB for rotation memory */
rsize = 128;
break;
case 3:
hwdev->max_line_size = 2560;
/* two banks of 80KB for rotation memory */
rsize = 80;
}
hwdev->rotation_memory[0] = hwdev->rotation_memory[1] = rsize * SZ_1K;
return 0;
}
const struct malidp_hw malidp_device[MALIDP_MAX_DEVICES] = {
[MALIDP_500] = {
.map = {
.coeffs_base = MALIDP500_COEFFS_BASE,
.se_base = MALIDP500_SE_BASE,
.dc_base = MALIDP500_DC_BASE,
.out_depth_base = MALIDP500_OUTPUT_DEPTH,
.features = 0, /* no CLEARIRQ register */
.n_layers = ARRAY_SIZE(malidp500_layers),
.layers = malidp500_layers,
.de_irq_map = {
.irq_mask = MALIDP_DE_IRQ_UNDERRUN |
MALIDP500_DE_IRQ_AXI_ERR |
MALIDP500_DE_IRQ_VSYNC |
MALIDP500_DE_IRQ_GLOBAL,
.vsync_irq = MALIDP500_DE_IRQ_VSYNC,
.err_mask = MALIDP_DE_IRQ_UNDERRUN |
MALIDP500_DE_IRQ_AXI_ERR |
MALIDP500_DE_IRQ_SATURATION,
},
.se_irq_map = {
.irq_mask = MALIDP500_SE_IRQ_CONF_MODE |
MALIDP500_SE_IRQ_CONF_VALID |
MALIDP500_SE_IRQ_GLOBAL,
.vsync_irq = MALIDP500_SE_IRQ_CONF_VALID,
.err_mask = MALIDP500_SE_IRQ_INIT_BUSY |
MALIDP500_SE_IRQ_AXI_ERROR |
MALIDP500_SE_IRQ_OVERRUN,
},
.dc_irq_map = {
.irq_mask = MALIDP500_DE_IRQ_CONF_VALID,
.vsync_irq = MALIDP500_DE_IRQ_CONF_VALID,
},
.pixel_formats = malidp500_de_formats,
.n_pixel_formats = ARRAY_SIZE(malidp500_de_formats),
.bus_align_bytes = 8,
},
.query_hw = malidp500_query_hw,
.enter_config_mode = malidp500_enter_config_mode,
.leave_config_mode = malidp500_leave_config_mode,
.in_config_mode = malidp500_in_config_mode,
.set_config_valid = malidp500_set_config_valid,
.modeset = malidp500_modeset,
.rotmem_required = malidp500_rotmem_required,
.se_set_scaling_coeffs = malidp500_se_set_scaling_coeffs,
.se_calc_mclk = malidp500_se_calc_mclk,
.enable_memwrite = malidp500_enable_memwrite,
.disable_memwrite = malidp500_disable_memwrite,
.features = MALIDP_DEVICE_LV_HAS_3_STRIDES,
},
[MALIDP_550] = {
.map = {
.coeffs_base = MALIDP550_COEFFS_BASE,
.se_base = MALIDP550_SE_BASE,
.dc_base = MALIDP550_DC_BASE,
.out_depth_base = MALIDP550_DE_OUTPUT_DEPTH,
drm/arm/malidp:- Define a common list of AFBC format modifiers supported for DP500, DP550 and DP650 We need to define a common list of format modifiers supported by each of the Mali display processors. The following are the constraints with AFBC:- 1. AFBC is not supported for the formats defined in malidp_hw_format_is_linear_only() 2. Some of the formats are supported only with AFBC modifiers. Thus we have introduced a new function 'malidp_hw_format_is_afbc_only()' which verifies the same. 3. AFBC_FORMAT_MOD_YTR needs to be provided for any RGB format. 4. Formats <= 16bpp cannot support AFBC_FORMAT_MOD_SPLIT. 5. CBR should not be set for non-subsampled formats. 6. SMART layer does not support framebuffer with AFBC modifiers. Return -EINVAL for such a scenario. 7. AFBC_FORMAT_MOD_YTR is not supported for any YUV formats. 8. Formats which are subsampled cannot support AFBC_FORMAT_MOD_SPLIT. However in DP550, YUV_420_10BIT is supported with AFBC_FORMAT_MOD_SPLIT. This feature has been identified with MALIDP_DEVICE_AFBC_YUV_420_10_SUPPORT_SPLIT. 9. In DP550 and DP650, for YUYV, the hardware supports different format-ids to be used with and without AFBC modifier. We have used the feature 'MALIDP_DEVICE_AFBC_YUYV_USE_422_P2' to identify this characteristic. 10. DP500 does not support split mode (ie AFBC_FORMAT_MOD_SPLIT). We have used the feature 'MALIDP_DEVICE_AFBC_SUPPORT_SPLIT' to identify the DPs which support SPLIT mode. 11. DP550 supports YUV420 with split mode. We have defined the feature 'AFBC_SUPPORT_SPLIT_WITH_YUV_420_10' to identify this characteristic. Changes since v1:- - Merged https://patchwork.freedesktop.org/patch/265215/ into this patch - As Liviu pointed out in the last patch, we can pull the checks outside of the 'while (*modifiers != DRM_FORMAT_MOD_INVALID)' loop - Rebased Changes since v3 (series): - Added the ack - Rebased on the latest drm-misc-next Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Link: https://patchwork.freedesktop.org/patch/291762/?series=57895&rev=1
2018-07-17 18:11:09 +07:00
.features = MALIDP_REGMAP_HAS_CLEARIRQ |
MALIDP_DEVICE_AFBC_SUPPORT_SPLIT |
MALIDP_DEVICE_AFBC_YUV_420_10_SUPPORT_SPLIT |
MALIDP_DEVICE_AFBC_YUYV_USE_422_P2,
.n_layers = ARRAY_SIZE(malidp550_layers),
.layers = malidp550_layers,
.de_irq_map = {
.irq_mask = MALIDP_DE_IRQ_UNDERRUN |
MALIDP550_DE_IRQ_VSYNC,
.vsync_irq = MALIDP550_DE_IRQ_VSYNC,
.err_mask = MALIDP_DE_IRQ_UNDERRUN |
MALIDP550_DE_IRQ_SATURATION |
MALIDP550_DE_IRQ_AXI_ERR,
},
.se_irq_map = {
.irq_mask = MALIDP550_SE_IRQ_EOW,
.vsync_irq = MALIDP550_SE_IRQ_EOW,
.err_mask = MALIDP550_SE_IRQ_AXI_ERR |
MALIDP550_SE_IRQ_OVR |
MALIDP550_SE_IRQ_IBSY,
},
.dc_irq_map = {
.irq_mask = MALIDP550_DC_IRQ_CONF_VALID |
MALIDP550_DC_IRQ_SE,
.vsync_irq = MALIDP550_DC_IRQ_CONF_VALID,
},
.pixel_formats = malidp550_de_formats,
.n_pixel_formats = ARRAY_SIZE(malidp550_de_formats),
.bus_align_bytes = 8,
},
.query_hw = malidp550_query_hw,
.enter_config_mode = malidp550_enter_config_mode,
.leave_config_mode = malidp550_leave_config_mode,
.in_config_mode = malidp550_in_config_mode,
.set_config_valid = malidp550_set_config_valid,
.modeset = malidp550_modeset,
.rotmem_required = malidp550_rotmem_required,
.se_set_scaling_coeffs = malidp550_se_set_scaling_coeffs,
.se_calc_mclk = malidp550_se_calc_mclk,
.enable_memwrite = malidp550_enable_memwrite,
.disable_memwrite = malidp550_disable_memwrite,
.features = 0,
},
[MALIDP_650] = {
.map = {
.coeffs_base = MALIDP550_COEFFS_BASE,
.se_base = MALIDP550_SE_BASE,
.dc_base = MALIDP550_DC_BASE,
.out_depth_base = MALIDP550_DE_OUTPUT_DEPTH,
drm/arm/malidp:- Define a common list of AFBC format modifiers supported for DP500, DP550 and DP650 We need to define a common list of format modifiers supported by each of the Mali display processors. The following are the constraints with AFBC:- 1. AFBC is not supported for the formats defined in malidp_hw_format_is_linear_only() 2. Some of the formats are supported only with AFBC modifiers. Thus we have introduced a new function 'malidp_hw_format_is_afbc_only()' which verifies the same. 3. AFBC_FORMAT_MOD_YTR needs to be provided for any RGB format. 4. Formats <= 16bpp cannot support AFBC_FORMAT_MOD_SPLIT. 5. CBR should not be set for non-subsampled formats. 6. SMART layer does not support framebuffer with AFBC modifiers. Return -EINVAL for such a scenario. 7. AFBC_FORMAT_MOD_YTR is not supported for any YUV formats. 8. Formats which are subsampled cannot support AFBC_FORMAT_MOD_SPLIT. However in DP550, YUV_420_10BIT is supported with AFBC_FORMAT_MOD_SPLIT. This feature has been identified with MALIDP_DEVICE_AFBC_YUV_420_10_SUPPORT_SPLIT. 9. In DP550 and DP650, for YUYV, the hardware supports different format-ids to be used with and without AFBC modifier. We have used the feature 'MALIDP_DEVICE_AFBC_YUYV_USE_422_P2' to identify this characteristic. 10. DP500 does not support split mode (ie AFBC_FORMAT_MOD_SPLIT). We have used the feature 'MALIDP_DEVICE_AFBC_SUPPORT_SPLIT' to identify the DPs which support SPLIT mode. 11. DP550 supports YUV420 with split mode. We have defined the feature 'AFBC_SUPPORT_SPLIT_WITH_YUV_420_10' to identify this characteristic. Changes since v1:- - Merged https://patchwork.freedesktop.org/patch/265215/ into this patch - As Liviu pointed out in the last patch, we can pull the checks outside of the 'while (*modifiers != DRM_FORMAT_MOD_INVALID)' loop - Rebased Changes since v3 (series): - Added the ack - Rebased on the latest drm-misc-next Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Link: https://patchwork.freedesktop.org/patch/291762/?series=57895&rev=1
2018-07-17 18:11:09 +07:00
.features = MALIDP_REGMAP_HAS_CLEARIRQ |
MALIDP_DEVICE_AFBC_SUPPORT_SPLIT |
MALIDP_DEVICE_AFBC_YUYV_USE_422_P2,
.n_layers = ARRAY_SIZE(malidp650_layers),
.layers = malidp650_layers,
.de_irq_map = {
.irq_mask = MALIDP_DE_IRQ_UNDERRUN |
MALIDP650_DE_IRQ_DRIFT |
MALIDP550_DE_IRQ_VSYNC,
.vsync_irq = MALIDP550_DE_IRQ_VSYNC,
.err_mask = MALIDP_DE_IRQ_UNDERRUN |
MALIDP650_DE_IRQ_DRIFT |
MALIDP550_DE_IRQ_SATURATION |
MALIDP550_DE_IRQ_AXI_ERR |
MALIDP650_DE_IRQ_ACEV1 |
MALIDP650_DE_IRQ_ACEV2 |
MALIDP650_DE_IRQ_ACEG |
MALIDP650_DE_IRQ_AXIEP,
},
.se_irq_map = {
.irq_mask = MALIDP550_SE_IRQ_EOW,
.vsync_irq = MALIDP550_SE_IRQ_EOW,
.err_mask = MALIDP550_SE_IRQ_AXI_ERR |
MALIDP550_SE_IRQ_OVR |
MALIDP550_SE_IRQ_IBSY,
},
.dc_irq_map = {
.irq_mask = MALIDP550_DC_IRQ_CONF_VALID |
MALIDP550_DC_IRQ_SE,
.vsync_irq = MALIDP550_DC_IRQ_CONF_VALID,
},
.pixel_formats = malidp650_de_formats,
.n_pixel_formats = ARRAY_SIZE(malidp650_de_formats),
.bus_align_bytes = 16,
},
.query_hw = malidp650_query_hw,
.enter_config_mode = malidp550_enter_config_mode,
.leave_config_mode = malidp550_leave_config_mode,
.in_config_mode = malidp550_in_config_mode,
.set_config_valid = malidp550_set_config_valid,
.modeset = malidp550_modeset,
.rotmem_required = malidp650_rotmem_required,
.se_set_scaling_coeffs = malidp550_se_set_scaling_coeffs,
.se_calc_mclk = malidp550_se_calc_mclk,
.enable_memwrite = malidp550_enable_memwrite,
.disable_memwrite = malidp550_disable_memwrite,
.features = 0,
},
};
u8 malidp_hw_get_format_id(const struct malidp_hw_regmap *map,
drm/arm/malidp:- Define a common list of AFBC format modifiers supported for DP500, DP550 and DP650 We need to define a common list of format modifiers supported by each of the Mali display processors. The following are the constraints with AFBC:- 1. AFBC is not supported for the formats defined in malidp_hw_format_is_linear_only() 2. Some of the formats are supported only with AFBC modifiers. Thus we have introduced a new function 'malidp_hw_format_is_afbc_only()' which verifies the same. 3. AFBC_FORMAT_MOD_YTR needs to be provided for any RGB format. 4. Formats <= 16bpp cannot support AFBC_FORMAT_MOD_SPLIT. 5. CBR should not be set for non-subsampled formats. 6. SMART layer does not support framebuffer with AFBC modifiers. Return -EINVAL for such a scenario. 7. AFBC_FORMAT_MOD_YTR is not supported for any YUV formats. 8. Formats which are subsampled cannot support AFBC_FORMAT_MOD_SPLIT. However in DP550, YUV_420_10BIT is supported with AFBC_FORMAT_MOD_SPLIT. This feature has been identified with MALIDP_DEVICE_AFBC_YUV_420_10_SUPPORT_SPLIT. 9. In DP550 and DP650, for YUYV, the hardware supports different format-ids to be used with and without AFBC modifier. We have used the feature 'MALIDP_DEVICE_AFBC_YUYV_USE_422_P2' to identify this characteristic. 10. DP500 does not support split mode (ie AFBC_FORMAT_MOD_SPLIT). We have used the feature 'MALIDP_DEVICE_AFBC_SUPPORT_SPLIT' to identify the DPs which support SPLIT mode. 11. DP550 supports YUV420 with split mode. We have defined the feature 'AFBC_SUPPORT_SPLIT_WITH_YUV_420_10' to identify this characteristic. Changes since v1:- - Merged https://patchwork.freedesktop.org/patch/265215/ into this patch - As Liviu pointed out in the last patch, we can pull the checks outside of the 'while (*modifiers != DRM_FORMAT_MOD_INVALID)' loop - Rebased Changes since v3 (series): - Added the ack - Rebased on the latest drm-misc-next Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Link: https://patchwork.freedesktop.org/patch/291762/?series=57895&rev=1
2018-07-17 18:11:09 +07:00
u8 layer_id, u32 format, bool has_modifier)
{
unsigned int i;
for (i = 0; i < map->n_pixel_formats; i++) {
if (((map->pixel_formats[i].layer & layer_id) == layer_id) &&
drm/arm/malidp:- Define a common list of AFBC format modifiers supported for DP500, DP550 and DP650 We need to define a common list of format modifiers supported by each of the Mali display processors. The following are the constraints with AFBC:- 1. AFBC is not supported for the formats defined in malidp_hw_format_is_linear_only() 2. Some of the formats are supported only with AFBC modifiers. Thus we have introduced a new function 'malidp_hw_format_is_afbc_only()' which verifies the same. 3. AFBC_FORMAT_MOD_YTR needs to be provided for any RGB format. 4. Formats <= 16bpp cannot support AFBC_FORMAT_MOD_SPLIT. 5. CBR should not be set for non-subsampled formats. 6. SMART layer does not support framebuffer with AFBC modifiers. Return -EINVAL for such a scenario. 7. AFBC_FORMAT_MOD_YTR is not supported for any YUV formats. 8. Formats which are subsampled cannot support AFBC_FORMAT_MOD_SPLIT. However in DP550, YUV_420_10BIT is supported with AFBC_FORMAT_MOD_SPLIT. This feature has been identified with MALIDP_DEVICE_AFBC_YUV_420_10_SUPPORT_SPLIT. 9. In DP550 and DP650, for YUYV, the hardware supports different format-ids to be used with and without AFBC modifier. We have used the feature 'MALIDP_DEVICE_AFBC_YUYV_USE_422_P2' to identify this characteristic. 10. DP500 does not support split mode (ie AFBC_FORMAT_MOD_SPLIT). We have used the feature 'MALIDP_DEVICE_AFBC_SUPPORT_SPLIT' to identify the DPs which support SPLIT mode. 11. DP550 supports YUV420 with split mode. We have defined the feature 'AFBC_SUPPORT_SPLIT_WITH_YUV_420_10' to identify this characteristic. Changes since v1:- - Merged https://patchwork.freedesktop.org/patch/265215/ into this patch - As Liviu pointed out in the last patch, we can pull the checks outside of the 'while (*modifiers != DRM_FORMAT_MOD_INVALID)' loop - Rebased Changes since v3 (series): - Added the ack - Rebased on the latest drm-misc-next Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Link: https://patchwork.freedesktop.org/patch/291762/?series=57895&rev=1
2018-07-17 18:11:09 +07:00
(map->pixel_formats[i].format == format)) {
/*
* In some DP550 and DP650, DRM_FORMAT_YUYV + AFBC modifier
* is supported by a different h/w format id than
* DRM_FORMAT_YUYV (only).
*/
if (format == DRM_FORMAT_YUYV &&
(has_modifier) &&
(map->features & MALIDP_DEVICE_AFBC_YUYV_USE_422_P2))
return AFBC_YUV_422_FORMAT_ID;
else
return map->pixel_formats[i].id;
}
}
return MALIDP_INVALID_FORMAT_ID;
}
drm/arm/malidp:- Define a common list of AFBC format modifiers supported for DP500, DP550 and DP650 We need to define a common list of format modifiers supported by each of the Mali display processors. The following are the constraints with AFBC:- 1. AFBC is not supported for the formats defined in malidp_hw_format_is_linear_only() 2. Some of the formats are supported only with AFBC modifiers. Thus we have introduced a new function 'malidp_hw_format_is_afbc_only()' which verifies the same. 3. AFBC_FORMAT_MOD_YTR needs to be provided for any RGB format. 4. Formats <= 16bpp cannot support AFBC_FORMAT_MOD_SPLIT. 5. CBR should not be set for non-subsampled formats. 6. SMART layer does not support framebuffer with AFBC modifiers. Return -EINVAL for such a scenario. 7. AFBC_FORMAT_MOD_YTR is not supported for any YUV formats. 8. Formats which are subsampled cannot support AFBC_FORMAT_MOD_SPLIT. However in DP550, YUV_420_10BIT is supported with AFBC_FORMAT_MOD_SPLIT. This feature has been identified with MALIDP_DEVICE_AFBC_YUV_420_10_SUPPORT_SPLIT. 9. In DP550 and DP650, for YUYV, the hardware supports different format-ids to be used with and without AFBC modifier. We have used the feature 'MALIDP_DEVICE_AFBC_YUYV_USE_422_P2' to identify this characteristic. 10. DP500 does not support split mode (ie AFBC_FORMAT_MOD_SPLIT). We have used the feature 'MALIDP_DEVICE_AFBC_SUPPORT_SPLIT' to identify the DPs which support SPLIT mode. 11. DP550 supports YUV420 with split mode. We have defined the feature 'AFBC_SUPPORT_SPLIT_WITH_YUV_420_10' to identify this characteristic. Changes since v1:- - Merged https://patchwork.freedesktop.org/patch/265215/ into this patch - As Liviu pointed out in the last patch, we can pull the checks outside of the 'while (*modifiers != DRM_FORMAT_MOD_INVALID)' loop - Rebased Changes since v3 (series): - Added the ack - Rebased on the latest drm-misc-next Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Link: https://patchwork.freedesktop.org/patch/291762/?series=57895&rev=1
2018-07-17 18:11:09 +07:00
bool malidp_hw_format_is_linear_only(u32 format)
{
switch (format) {
case DRM_FORMAT_ARGB2101010:
case DRM_FORMAT_RGBA1010102:
case DRM_FORMAT_BGRA1010102:
case DRM_FORMAT_ARGB8888:
case DRM_FORMAT_RGBA8888:
case DRM_FORMAT_BGRA8888:
case DRM_FORMAT_XBGR8888:
case DRM_FORMAT_XRGB8888:
case DRM_FORMAT_RGBX8888:
case DRM_FORMAT_BGRX8888:
case DRM_FORMAT_RGB888:
case DRM_FORMAT_RGB565:
case DRM_FORMAT_ARGB1555:
case DRM_FORMAT_RGBA5551:
case DRM_FORMAT_BGRA5551:
case DRM_FORMAT_UYVY:
case DRM_FORMAT_XYUV8888:
case DRM_FORMAT_XVYU2101010:
case DRM_FORMAT_X0L2:
case DRM_FORMAT_X0L0:
return true;
default:
return false;
}
}
bool malidp_hw_format_is_afbc_only(u32 format)
{
switch (format) {
case DRM_FORMAT_VUY888:
case DRM_FORMAT_VUY101010:
case DRM_FORMAT_YUV420_8BIT:
case DRM_FORMAT_YUV420_10BIT:
return true;
default:
return false;
}
}
static void malidp_hw_clear_irq(struct malidp_hw_device *hwdev, u8 block, u32 irq)
{
u32 base = malidp_get_block_base(hwdev, block);
if (hwdev->hw->map.features & MALIDP_REGMAP_HAS_CLEARIRQ)
malidp_hw_write(hwdev, irq, base + MALIDP_REG_CLEARIRQ);
else
malidp_hw_write(hwdev, irq, base + MALIDP_REG_STATUS);
}
static irqreturn_t malidp_de_irq(int irq, void *arg)
{
struct drm_device *drm = arg;
struct malidp_drm *malidp = drm->dev_private;
struct malidp_hw_device *hwdev;
struct malidp_hw *hw;
const struct malidp_irq_map *de;
u32 status, mask, dc_status;
irqreturn_t ret = IRQ_NONE;
hwdev = malidp->dev;
hw = hwdev->hw;
de = &hw->map.de_irq_map;
/*
* if we are suspended it is likely that we were invoked because
* we share an interrupt line with some other driver, don't try
* to read the hardware registers
*/
if (hwdev->pm_suspended)
return IRQ_NONE;
/* first handle the config valid IRQ */
dc_status = malidp_hw_read(hwdev, hw->map.dc_base + MALIDP_REG_STATUS);
if (dc_status & hw->map.dc_irq_map.vsync_irq) {
malidp_hw_clear_irq(hwdev, MALIDP_DC_BLOCK, dc_status);
/* do we have a page flip event? */
if (malidp->event != NULL) {
spin_lock(&drm->event_lock);
drm_crtc_send_vblank_event(&malidp->crtc, malidp->event);
malidp->event = NULL;
spin_unlock(&drm->event_lock);
}
atomic_set(&malidp->config_valid, MALIDP_CONFIG_VALID_DONE);
ret = IRQ_WAKE_THREAD;
}
status = malidp_hw_read(hwdev, MALIDP_REG_STATUS);
if (!(status & de->irq_mask))
return ret;
mask = malidp_hw_read(hwdev, MALIDP_REG_MASKIRQ);
/* keep the status of the enabled interrupts, plus the error bits */
status &= (mask | de->err_mask);
if ((status & de->vsync_irq) && malidp->crtc.enabled)
drm_crtc_handle_vblank(&malidp->crtc);
#ifdef CONFIG_DEBUG_FS
if (status & de->err_mask) {
malidp_error(malidp, &malidp->de_errors, status,
drm_crtc_vblank_count(&malidp->crtc));
}
#endif
malidp_hw_clear_irq(hwdev, MALIDP_DE_BLOCK, status);
return (ret == IRQ_NONE) ? IRQ_HANDLED : ret;
}
static irqreturn_t malidp_de_irq_thread_handler(int irq, void *arg)
{
struct drm_device *drm = arg;
struct malidp_drm *malidp = drm->dev_private;
wake_up(&malidp->wq);
return IRQ_HANDLED;
}
void malidp_de_irq_hw_init(struct malidp_hw_device *hwdev)
{
/* ensure interrupts are disabled */
malidp_hw_disable_irq(hwdev, MALIDP_DE_BLOCK, 0xffffffff);
malidp_hw_clear_irq(hwdev, MALIDP_DE_BLOCK, 0xffffffff);
malidp_hw_disable_irq(hwdev, MALIDP_DC_BLOCK, 0xffffffff);
malidp_hw_clear_irq(hwdev, MALIDP_DC_BLOCK, 0xffffffff);
/* first enable the DC block IRQs */
malidp_hw_enable_irq(hwdev, MALIDP_DC_BLOCK,
hwdev->hw->map.dc_irq_map.irq_mask);
/* now enable the DE block IRQs */
malidp_hw_enable_irq(hwdev, MALIDP_DE_BLOCK,
hwdev->hw->map.de_irq_map.irq_mask);
}
int malidp_de_irq_init(struct drm_device *drm, int irq)
{
struct malidp_drm *malidp = drm->dev_private;
struct malidp_hw_device *hwdev = malidp->dev;
int ret;
/* ensure interrupts are disabled */
malidp_hw_disable_irq(hwdev, MALIDP_DE_BLOCK, 0xffffffff);
malidp_hw_clear_irq(hwdev, MALIDP_DE_BLOCK, 0xffffffff);
malidp_hw_disable_irq(hwdev, MALIDP_DC_BLOCK, 0xffffffff);
malidp_hw_clear_irq(hwdev, MALIDP_DC_BLOCK, 0xffffffff);
ret = devm_request_threaded_irq(drm->dev, irq, malidp_de_irq,
malidp_de_irq_thread_handler,
IRQF_SHARED, "malidp-de", drm);
if (ret < 0) {
DRM_ERROR("failed to install DE IRQ handler\n");
return ret;
}
malidp_de_irq_hw_init(hwdev);
return 0;
}
void malidp_de_irq_fini(struct malidp_hw_device *hwdev)
{
malidp_hw_disable_irq(hwdev, MALIDP_DE_BLOCK,
hwdev->hw->map.de_irq_map.irq_mask);
malidp_hw_disable_irq(hwdev, MALIDP_DC_BLOCK,
hwdev->hw->map.dc_irq_map.irq_mask);
}
static irqreturn_t malidp_se_irq(int irq, void *arg)
{
struct drm_device *drm = arg;
struct malidp_drm *malidp = drm->dev_private;
struct malidp_hw_device *hwdev = malidp->dev;
struct malidp_hw *hw = hwdev->hw;
const struct malidp_irq_map *se = &hw->map.se_irq_map;
u32 status, mask;
/*
* if we are suspended it is likely that we were invoked because
* we share an interrupt line with some other driver, don't try
* to read the hardware registers
*/
if (hwdev->pm_suspended)
return IRQ_NONE;
status = malidp_hw_read(hwdev, hw->map.se_base + MALIDP_REG_STATUS);
if (!(status & (se->irq_mask | se->err_mask)))
return IRQ_NONE;
#ifdef CONFIG_DEBUG_FS
if (status & se->err_mask)
malidp_error(malidp, &malidp->se_errors, status,
drm_crtc_vblank_count(&malidp->crtc));
#endif
mask = malidp_hw_read(hwdev, hw->map.se_base + MALIDP_REG_MASKIRQ);
status &= mask;
if (status & se->vsync_irq) {
switch (hwdev->mw_state) {
case MW_ONESHOT:
drm_writeback_signal_completion(&malidp->mw_connector, 0);
break;
case MW_STOP:
drm_writeback_signal_completion(&malidp->mw_connector, 0);
/* disable writeback after stop */
hwdev->mw_state = MW_NOT_ENABLED;
break;
case MW_RESTART:
drm_writeback_signal_completion(&malidp->mw_connector, 0);
/* fall through - to a new start */
case MW_START:
/* writeback started, need to emulate one-shot mode */
hw->disable_memwrite(hwdev);
/*
* only set config_valid HW bit if there is no other update
* in progress or if we raced ahead of the DE IRQ handler
* and config_valid flag will not be update until later
*/
status = malidp_hw_read(hwdev, hw->map.dc_base + MALIDP_REG_STATUS);
if ((atomic_read(&malidp->config_valid) != MALIDP_CONFIG_START) ||
(status & hw->map.dc_irq_map.vsync_irq))
hw->set_config_valid(hwdev, 1);
break;
}
}
malidp_hw_clear_irq(hwdev, MALIDP_SE_BLOCK, status);
return IRQ_HANDLED;
}
void malidp_se_irq_hw_init(struct malidp_hw_device *hwdev)
{
/* ensure interrupts are disabled */
malidp_hw_disable_irq(hwdev, MALIDP_SE_BLOCK, 0xffffffff);
malidp_hw_clear_irq(hwdev, MALIDP_SE_BLOCK, 0xffffffff);
malidp_hw_enable_irq(hwdev, MALIDP_SE_BLOCK,
hwdev->hw->map.se_irq_map.irq_mask);
}
static irqreturn_t malidp_se_irq_thread_handler(int irq, void *arg)
{
return IRQ_HANDLED;
}
int malidp_se_irq_init(struct drm_device *drm, int irq)
{
struct malidp_drm *malidp = drm->dev_private;
struct malidp_hw_device *hwdev = malidp->dev;
int ret;
/* ensure interrupts are disabled */
malidp_hw_disable_irq(hwdev, MALIDP_SE_BLOCK, 0xffffffff);
malidp_hw_clear_irq(hwdev, MALIDP_SE_BLOCK, 0xffffffff);
ret = devm_request_threaded_irq(drm->dev, irq, malidp_se_irq,
malidp_se_irq_thread_handler,
IRQF_SHARED, "malidp-se", drm);
if (ret < 0) {
DRM_ERROR("failed to install SE IRQ handler\n");
return ret;
}
hwdev->mw_state = MW_NOT_ENABLED;
malidp_se_irq_hw_init(hwdev);
return 0;
}
void malidp_se_irq_fini(struct malidp_hw_device *hwdev)
{
malidp_hw_disable_irq(hwdev, MALIDP_SE_BLOCK,
hwdev->hw->map.se_irq_map.irq_mask);
}