linux_dsm_epyc7002/drivers/media/radio/radio-mr800.c

600 lines
16 KiB
C
Raw Normal View History

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157 Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-27 13:55:06 +07:00
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* A driver for the AverMedia MR 800 USB FM radio. This device plugs
* into both the USB and an analog audio input, so this thing
* only deals with initialization and frequency setting, the
* audio data has to be handled by a sound driver.
*
* Copyright (c) 2008 Alexey Klimov <klimov.linux@gmail.com>
*/
/*
* Big thanks to authors and contributors of dsbr100.c and radio-si470x.c
*
* When work was looked pretty good, i discover this:
* http://av-usbradio.sourceforge.net/index.php
* http://sourceforge.net/projects/av-usbradio/
* Latest release of theirs project was in 2005.
* Probably, this driver could be improved through using their
* achievements (specifications given).
* Also, Faidon Liambotis <paravoid@debian.org> wrote nice driver for this radio
* in 2007. He allowed to use his driver to improve current mr800 radio driver.
* http://www.spinics.net/lists/linux-usb-devel/msg10109.html
*
* Version 0.01: First working version.
* It's required to blacklist AverMedia USB Radio
* in usbhid/hid-quirks.c
* Version 0.10: A lot of cleanups and fixes: unpluging the device,
* few mutex locks were added, codinstyle issues, etc.
* Added stereo support. Thanks to
* Douglas Schilling Landgraf <dougsland@gmail.com> and
* David Ellingsworth <david@identd.dyndns.org>
* for discussion, help and support.
* Version 0.11: Converted to v4l2_device.
*
* Many things to do:
* - Correct power management of device (suspend & resume)
* - Add code for scanning and smooth tuning
* - Add code for sensitivity value
* - Correct mistakes
* - In Japan another FREQ_MIN and FREQ_MAX
*/
/* kernel includes */
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/input.h>
#include <linux/videodev2.h>
#include <media/v4l2-device.h>
#include <media/v4l2-ioctl.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-event.h>
#include <linux/usb.h>
#include <linux/mutex.h>
/* driver and module definitions */
#define DRIVER_AUTHOR "Alexey Klimov <klimov.linux@gmail.com>"
#define DRIVER_DESC "AverMedia MR 800 USB FM radio driver"
#define DRIVER_VERSION "0.1.2"
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
MODULE_VERSION(DRIVER_VERSION);
#define USB_AMRADIO_VENDOR 0x07ca
#define USB_AMRADIO_PRODUCT 0xb800
/* dev_warn macro with driver name */
#define MR800_DRIVER_NAME "radio-mr800"
#define amradio_dev_warn(dev, fmt, arg...) \
dev_warn(dev, MR800_DRIVER_NAME " - " fmt, ##arg)
#define amradio_dev_err(dev, fmt, arg...) \
dev_err(dev, MR800_DRIVER_NAME " - " fmt, ##arg)
/* Probably USB_TIMEOUT should be modified in module parameter */
#define BUFFER_LENGTH 8
#define USB_TIMEOUT 500
/* Frequency limits in MHz -- these are European values. For Japanese
devices, that would be 76 and 91. */
#define FREQ_MIN 87.5
#define FREQ_MAX 108.0
#define FREQ_MUL 16000
/*
* Commands that device should understand
* List isn't full and will be updated with implementation of new functions
*/
#define AMRADIO_SET_FREQ 0xa4
#define AMRADIO_GET_READY_FLAG 0xa5
#define AMRADIO_GET_SIGNAL 0xa7
#define AMRADIO_GET_FREQ 0xa8
#define AMRADIO_SET_SEARCH_UP 0xa9
#define AMRADIO_SET_SEARCH_DOWN 0xaa
#define AMRADIO_SET_MUTE 0xab
#define AMRADIO_SET_RIGHT_MUTE 0xac
#define AMRADIO_SET_LEFT_MUTE 0xad
#define AMRADIO_SET_MONO 0xae
#define AMRADIO_SET_SEARCH_LVL 0xb0
#define AMRADIO_STOP_SEARCH 0xb1
/* Comfortable defines for amradio_set_stereo */
#define WANT_STEREO 0x00
#define WANT_MONO 0x01
/* module parameter */
static int radio_nr = -1;
module_param(radio_nr, int, 0);
MODULE_PARM_DESC(radio_nr, "Radio Nr");
/* Data for one (physical) device */
struct amradio_device {
/* reference to USB and video device */
struct usb_device *usbdev;
struct usb_interface *intf;
struct video_device vdev;
struct v4l2_device v4l2_dev;
struct v4l2_ctrl_handler hdl;
u8 *buffer;
struct mutex lock; /* buffer locking */
int curfreq;
int stereo;
int muted;
};
static inline struct amradio_device *to_amradio_dev(struct v4l2_device *v4l2_dev)
{
return container_of(v4l2_dev, struct amradio_device, v4l2_dev);
}
static int amradio_send_cmd(struct amradio_device *radio, u8 cmd, u8 arg,
u8 *extra, u8 extralen, bool reply)
{
int retval;
int size;
radio->buffer[0] = 0x00;
radio->buffer[1] = 0x55;
radio->buffer[2] = 0xaa;
radio->buffer[3] = extralen;
radio->buffer[4] = cmd;
radio->buffer[5] = arg;
radio->buffer[6] = 0x00;
radio->buffer[7] = extra || reply ? 8 : 0;
retval = usb_bulk_msg(radio->usbdev, usb_sndintpipe(radio->usbdev, 2),
radio->buffer, BUFFER_LENGTH, &size, USB_TIMEOUT);
if (retval < 0 || size != BUFFER_LENGTH) {
if (video_is_registered(&radio->vdev))
amradio_dev_warn(&radio->vdev.dev,
"cmd %02x failed\n", cmd);
return retval ? retval : -EIO;
}
if (!extra && !reply)
return 0;
if (extra) {
memcpy(radio->buffer, extra, extralen);
memset(radio->buffer + extralen, 0, 8 - extralen);
retval = usb_bulk_msg(radio->usbdev, usb_sndintpipe(radio->usbdev, 2),
radio->buffer, BUFFER_LENGTH, &size, USB_TIMEOUT);
} else {
memset(radio->buffer, 0, 8);
retval = usb_bulk_msg(radio->usbdev, usb_rcvbulkpipe(radio->usbdev, 0x81),
radio->buffer, BUFFER_LENGTH, &size, USB_TIMEOUT);
}
if (retval == 0 && size == BUFFER_LENGTH)
return 0;
if (video_is_registered(&radio->vdev) && cmd != AMRADIO_GET_READY_FLAG)
amradio_dev_warn(&radio->vdev.dev, "follow-up to cmd %02x failed\n", cmd);
return retval ? retval : -EIO;
}
/* switch on/off the radio. Send 8 bytes to device */
static int amradio_set_mute(struct amradio_device *radio, bool mute)
{
int ret = amradio_send_cmd(radio,
AMRADIO_SET_MUTE, mute, NULL, 0, false);
if (!ret)
radio->muted = mute;
return ret;
}
/* set a frequency, freq is defined by v4l's TUNER_LOW, i.e. 1/16th kHz */
static int amradio_set_freq(struct amradio_device *radio, int freq)
{
[media] radio-mr800: move clamp_t check inside amradio_set_freq() If i run verbose v4l2-compliance with my radio-mr800 device few times then i get warning about frequency out of range: root@machine:~# v4l2-compliance -r /dev/radio0 -v 2 is radio Driver Info: Driver name : radio-mr800 Card type : AverMedia MR 800 USB FM Radio Bus info : usb-0000:00:1a.0-1.2 Driver version: 3.9.0 Capabilities : 0x80050400 Tuner Radio Device Capabilities Device Caps : 0x00050400 Tuner Radio Compliance test for device /dev/radio0 (not using libv4l2): Required ioctls: test VIDIOC_QUERYCAP: OK Allow for multiple opens: test second radio open: OK test VIDIOC_QUERYCAP: OK test VIDIOC_G/S_PRIORITY: OK Debug ioctls: test VIDIOC_DBG_G_CHIP_IDENT: OK (Not Supported) test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) test VIDIOC_LOG_STATUS: OK Input ioctls: test VIDIOC_G/S_TUNER: OK warn: v4l2-test-input-output.cpp(234): returned tuner 0 frequency out of range (6550200 not in [1400000...1728000]) test VIDIOC_G/S_FREQUENCY: OK test VIDIOC_S_HW_FREQ_SEEK: OK test VIDIOC_ENUMAUDIO: OK (Not Supported) test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) test VIDIOC_G/S_AUDIO: OK (Not Supported) Inputs: 0 Audio Inputs: 0 Tuners: 1 Output ioctls: test VIDIOC_G/S_MODULATOR: OK (Not Supported) test VIDIOC_G/S_FREQUENCY: OK test VIDIOC_ENUMAUDOUT: OK (Not Supported) test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) test VIDIOC_G/S_AUDOUT: OK (Not Supported) Outputs: 0 Audio Outputs: 0 Modulators: 0 Control ioctls: info: checking v4l2_queryctrl of control 'User Controls' (0x00980001) info: checking v4l2_queryctrl of control 'Mute' (0x00980909) info: checking v4l2_queryctrl of control 'Mute' (0x00980909) test VIDIOC_QUERYCTRL/MENU: OK info: checking control 'User Controls' (0x00980001) info: checking control 'Mute' (0x00980909) test VIDIOC_G/S_CTRL: OK info: checking extended control 'User Controls' (0x00980001) info: checking extended control 'Mute' (0x00980909) test VIDIOC_G/S/TRY_EXT_CTRLS: OK info: checking control event 'User Controls' (0x00980001) info: checking control event 'Mute' (0x00980909) test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) Standard Controls: 2 Private Controls: 0 Input/Output configuration ioctls: test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) test VIDIOC_ENUM/G/S/QUERY_DV_PRESETS: OK (Not Supported) test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) Format ioctls: test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported) test VIDIOC_G/S_PARM: OK (Not Supported) test VIDIOC_G_FBUF: OK (Not Supported) test VIDIOC_G_FMT: OK (Not Supported) test VIDIOC_TRY_FMT: OK (Not Supported) test VIDIOC_S_FMT: OK (Not Supported) test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) Codec ioctls: test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) test VIDIOC_G_ENC_INDEX: OK (Not Supported) test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) Buffer ioctls: test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported) Total: 38, Succeeded: 38, Failed: 0, Warnings: 1 Some printk() debugging showed that vidioc_s_hw_freq_seek() setups radio->curfreq to out of range value (lines 395-396) and calls amradio_set_freq() to set this frequency on device without any out-of-range checks. Patch protects from setting up frequency on device to incorrect value moving clamp_t check inside amradio_set_freq. With this patch we can call amradio_set_freq() with out of range frequency from any place. Also put comment that sometimes radio->curfreq is set to out of range value in vidioc_s_hw_freq_seek(). Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-15 04:12:06 +07:00
unsigned short freq_send;
u8 buf[3];
int retval;
[media] radio-mr800: move clamp_t check inside amradio_set_freq() If i run verbose v4l2-compliance with my radio-mr800 device few times then i get warning about frequency out of range: root@machine:~# v4l2-compliance -r /dev/radio0 -v 2 is radio Driver Info: Driver name : radio-mr800 Card type : AverMedia MR 800 USB FM Radio Bus info : usb-0000:00:1a.0-1.2 Driver version: 3.9.0 Capabilities : 0x80050400 Tuner Radio Device Capabilities Device Caps : 0x00050400 Tuner Radio Compliance test for device /dev/radio0 (not using libv4l2): Required ioctls: test VIDIOC_QUERYCAP: OK Allow for multiple opens: test second radio open: OK test VIDIOC_QUERYCAP: OK test VIDIOC_G/S_PRIORITY: OK Debug ioctls: test VIDIOC_DBG_G_CHIP_IDENT: OK (Not Supported) test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) test VIDIOC_LOG_STATUS: OK Input ioctls: test VIDIOC_G/S_TUNER: OK warn: v4l2-test-input-output.cpp(234): returned tuner 0 frequency out of range (6550200 not in [1400000...1728000]) test VIDIOC_G/S_FREQUENCY: OK test VIDIOC_S_HW_FREQ_SEEK: OK test VIDIOC_ENUMAUDIO: OK (Not Supported) test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) test VIDIOC_G/S_AUDIO: OK (Not Supported) Inputs: 0 Audio Inputs: 0 Tuners: 1 Output ioctls: test VIDIOC_G/S_MODULATOR: OK (Not Supported) test VIDIOC_G/S_FREQUENCY: OK test VIDIOC_ENUMAUDOUT: OK (Not Supported) test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) test VIDIOC_G/S_AUDOUT: OK (Not Supported) Outputs: 0 Audio Outputs: 0 Modulators: 0 Control ioctls: info: checking v4l2_queryctrl of control 'User Controls' (0x00980001) info: checking v4l2_queryctrl of control 'Mute' (0x00980909) info: checking v4l2_queryctrl of control 'Mute' (0x00980909) test VIDIOC_QUERYCTRL/MENU: OK info: checking control 'User Controls' (0x00980001) info: checking control 'Mute' (0x00980909) test VIDIOC_G/S_CTRL: OK info: checking extended control 'User Controls' (0x00980001) info: checking extended control 'Mute' (0x00980909) test VIDIOC_G/S/TRY_EXT_CTRLS: OK info: checking control event 'User Controls' (0x00980001) info: checking control event 'Mute' (0x00980909) test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) Standard Controls: 2 Private Controls: 0 Input/Output configuration ioctls: test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) test VIDIOC_ENUM/G/S/QUERY_DV_PRESETS: OK (Not Supported) test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) Format ioctls: test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported) test VIDIOC_G/S_PARM: OK (Not Supported) test VIDIOC_G_FBUF: OK (Not Supported) test VIDIOC_G_FMT: OK (Not Supported) test VIDIOC_TRY_FMT: OK (Not Supported) test VIDIOC_S_FMT: OK (Not Supported) test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) Codec ioctls: test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) test VIDIOC_G_ENC_INDEX: OK (Not Supported) test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) Buffer ioctls: test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported) Total: 38, Succeeded: 38, Failed: 0, Warnings: 1 Some printk() debugging showed that vidioc_s_hw_freq_seek() setups radio->curfreq to out of range value (lines 395-396) and calls amradio_set_freq() to set this frequency on device without any out-of-range checks. Patch protects from setting up frequency on device to incorrect value moving clamp_t check inside amradio_set_freq. With this patch we can call amradio_set_freq() with out of range frequency from any place. Also put comment that sometimes radio->curfreq is set to out of range value in vidioc_s_hw_freq_seek(). Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-15 04:12:06 +07:00
/* we need to be sure that frequency isn't out of range */
freq = clamp_t(unsigned, freq, FREQ_MIN * FREQ_MUL, FREQ_MAX * FREQ_MUL);
freq_send = 0x10 + (freq >> 3) / 25;
/* frequency is calculated from freq_send and placed in first 2 bytes */
buf[0] = (freq_send >> 8) & 0xff;
buf[1] = freq_send & 0xff;
buf[2] = 0x01;
retval = amradio_send_cmd(radio, AMRADIO_SET_FREQ, 0, buf, 3, false);
if (retval)
return retval;
radio->curfreq = freq;
msleep(40);
return 0;
}
static int amradio_set_stereo(struct amradio_device *radio, bool stereo)
{
int ret = amradio_send_cmd(radio,
AMRADIO_SET_MONO, !stereo, NULL, 0, false);
if (!ret)
radio->stereo = stereo;
return ret;
}
static int amradio_get_stat(struct amradio_device *radio, bool *is_stereo, u32 *signal)
{
int ret = amradio_send_cmd(radio,
AMRADIO_GET_SIGNAL, 0, NULL, 0, true);
if (ret)
return ret;
*is_stereo = radio->buffer[2] >> 7;
*signal = (radio->buffer[3] & 0xf0) << 8;
return 0;
}
/* Handle unplugging the device.
* We call video_unregister_device in any case.
* The last function called in this procedure is
* usb_amradio_device_release.
*/
static void usb_amradio_disconnect(struct usb_interface *intf)
{
struct amradio_device *radio = to_amradio_dev(usb_get_intfdata(intf));
mutex_lock(&radio->lock);
video_unregister_device(&radio->vdev);
amradio_set_mute(radio, true);
usb_set_intfdata(intf, NULL);
v4l2_device_disconnect(&radio->v4l2_dev);
mutex_unlock(&radio->lock);
v4l2_device_put(&radio->v4l2_dev);
}
/* vidioc_querycap - query device capabilities */
static int vidioc_querycap(struct file *file, void *priv,
struct v4l2_capability *v)
{
struct amradio_device *radio = video_drvdata(file);
strscpy(v->driver, "radio-mr800", sizeof(v->driver));
strscpy(v->card, "AverMedia MR 800 USB FM Radio", sizeof(v->card));
usb_make_path(radio->usbdev, v->bus_info, sizeof(v->bus_info));
return 0;
}
/* vidioc_g_tuner - get tuner attributes */
static int vidioc_g_tuner(struct file *file, void *priv,
struct v4l2_tuner *v)
{
struct amradio_device *radio = video_drvdata(file);
bool is_stereo = false;
int retval;
if (v->index > 0)
return -EINVAL;
v->signal = 0;
retval = amradio_get_stat(radio, &is_stereo, &v->signal);
if (retval)
return retval;
strscpy(v->name, "FM", sizeof(v->name));
v->type = V4L2_TUNER_RADIO;
v->rangelow = FREQ_MIN * FREQ_MUL;
v->rangehigh = FREQ_MAX * FREQ_MUL;
v->capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO |
V4L2_TUNER_CAP_HWSEEK_WRAP;
v->rxsubchans = is_stereo ? V4L2_TUNER_SUB_STEREO : V4L2_TUNER_SUB_MONO;
v->audmode = radio->stereo ?
V4L2_TUNER_MODE_STEREO : V4L2_TUNER_MODE_MONO;
return 0;
}
/* vidioc_s_tuner - set tuner attributes */
static int vidioc_s_tuner(struct file *file, void *priv,
const struct v4l2_tuner *v)
{
struct amradio_device *radio = video_drvdata(file);
if (v->index > 0)
return -EINVAL;
/* mono/stereo selector */
switch (v->audmode) {
case V4L2_TUNER_MODE_MONO:
return amradio_set_stereo(radio, WANT_MONO);
default:
return amradio_set_stereo(radio, WANT_STEREO);
}
}
/* vidioc_s_frequency - set tuner radio frequency */
static int vidioc_s_frequency(struct file *file, void *priv,
const struct v4l2_frequency *f)
{
struct amradio_device *radio = video_drvdata(file);
if (f->tuner != 0)
return -EINVAL;
[media] radio-mr800: move clamp_t check inside amradio_set_freq() If i run verbose v4l2-compliance with my radio-mr800 device few times then i get warning about frequency out of range: root@machine:~# v4l2-compliance -r /dev/radio0 -v 2 is radio Driver Info: Driver name : radio-mr800 Card type : AverMedia MR 800 USB FM Radio Bus info : usb-0000:00:1a.0-1.2 Driver version: 3.9.0 Capabilities : 0x80050400 Tuner Radio Device Capabilities Device Caps : 0x00050400 Tuner Radio Compliance test for device /dev/radio0 (not using libv4l2): Required ioctls: test VIDIOC_QUERYCAP: OK Allow for multiple opens: test second radio open: OK test VIDIOC_QUERYCAP: OK test VIDIOC_G/S_PRIORITY: OK Debug ioctls: test VIDIOC_DBG_G_CHIP_IDENT: OK (Not Supported) test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) test VIDIOC_LOG_STATUS: OK Input ioctls: test VIDIOC_G/S_TUNER: OK warn: v4l2-test-input-output.cpp(234): returned tuner 0 frequency out of range (6550200 not in [1400000...1728000]) test VIDIOC_G/S_FREQUENCY: OK test VIDIOC_S_HW_FREQ_SEEK: OK test VIDIOC_ENUMAUDIO: OK (Not Supported) test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) test VIDIOC_G/S_AUDIO: OK (Not Supported) Inputs: 0 Audio Inputs: 0 Tuners: 1 Output ioctls: test VIDIOC_G/S_MODULATOR: OK (Not Supported) test VIDIOC_G/S_FREQUENCY: OK test VIDIOC_ENUMAUDOUT: OK (Not Supported) test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) test VIDIOC_G/S_AUDOUT: OK (Not Supported) Outputs: 0 Audio Outputs: 0 Modulators: 0 Control ioctls: info: checking v4l2_queryctrl of control 'User Controls' (0x00980001) info: checking v4l2_queryctrl of control 'Mute' (0x00980909) info: checking v4l2_queryctrl of control 'Mute' (0x00980909) test VIDIOC_QUERYCTRL/MENU: OK info: checking control 'User Controls' (0x00980001) info: checking control 'Mute' (0x00980909) test VIDIOC_G/S_CTRL: OK info: checking extended control 'User Controls' (0x00980001) info: checking extended control 'Mute' (0x00980909) test VIDIOC_G/S/TRY_EXT_CTRLS: OK info: checking control event 'User Controls' (0x00980001) info: checking control event 'Mute' (0x00980909) test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) Standard Controls: 2 Private Controls: 0 Input/Output configuration ioctls: test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) test VIDIOC_ENUM/G/S/QUERY_DV_PRESETS: OK (Not Supported) test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) Format ioctls: test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported) test VIDIOC_G/S_PARM: OK (Not Supported) test VIDIOC_G_FBUF: OK (Not Supported) test VIDIOC_G_FMT: OK (Not Supported) test VIDIOC_TRY_FMT: OK (Not Supported) test VIDIOC_S_FMT: OK (Not Supported) test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) Codec ioctls: test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) test VIDIOC_G_ENC_INDEX: OK (Not Supported) test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) Buffer ioctls: test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported) Total: 38, Succeeded: 38, Failed: 0, Warnings: 1 Some printk() debugging showed that vidioc_s_hw_freq_seek() setups radio->curfreq to out of range value (lines 395-396) and calls amradio_set_freq() to set this frequency on device without any out-of-range checks. Patch protects from setting up frequency on device to incorrect value moving clamp_t check inside amradio_set_freq. With this patch we can call amradio_set_freq() with out of range frequency from any place. Also put comment that sometimes radio->curfreq is set to out of range value in vidioc_s_hw_freq_seek(). Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-15 04:12:06 +07:00
return amradio_set_freq(radio, f->frequency);
}
/* vidioc_g_frequency - get tuner radio frequency */
static int vidioc_g_frequency(struct file *file, void *priv,
struct v4l2_frequency *f)
{
struct amradio_device *radio = video_drvdata(file);
if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO)
return -EINVAL;
f->type = V4L2_TUNER_RADIO;
f->frequency = radio->curfreq;
return 0;
}
static int vidioc_s_hw_freq_seek(struct file *file, void *priv,
const struct v4l2_hw_freq_seek *seek)
{
static u8 buf[8] = {
0x3d, 0x32, 0x0f, 0x08, 0x3d, 0x32, 0x0f, 0x08
};
struct amradio_device *radio = video_drvdata(file);
unsigned long timeout;
int retval;
if (seek->tuner != 0 || !seek->wrap_around)
return -EINVAL;
if (file->f_flags & O_NONBLOCK)
return -EWOULDBLOCK;
retval = amradio_send_cmd(radio,
AMRADIO_SET_SEARCH_LVL, 0, buf, 8, false);
if (retval)
return retval;
amradio_set_freq(radio, radio->curfreq);
retval = amradio_send_cmd(radio,
seek->seek_upward ? AMRADIO_SET_SEARCH_UP : AMRADIO_SET_SEARCH_DOWN,
0, NULL, 0, false);
if (retval)
return retval;
timeout = jiffies + msecs_to_jiffies(30000);
for (;;) {
if (time_after(jiffies, timeout)) {
retval = -ENODATA;
break;
}
if (schedule_timeout_interruptible(msecs_to_jiffies(10))) {
retval = -ERESTARTSYS;
break;
}
retval = amradio_send_cmd(radio, AMRADIO_GET_READY_FLAG,
0, NULL, 0, true);
if (retval)
continue;
amradio_send_cmd(radio, AMRADIO_GET_FREQ, 0, NULL, 0, true);
if (radio->buffer[1] || radio->buffer[2]) {
[media] radio-mr800: move clamp_t check inside amradio_set_freq() If i run verbose v4l2-compliance with my radio-mr800 device few times then i get warning about frequency out of range: root@machine:~# v4l2-compliance -r /dev/radio0 -v 2 is radio Driver Info: Driver name : radio-mr800 Card type : AverMedia MR 800 USB FM Radio Bus info : usb-0000:00:1a.0-1.2 Driver version: 3.9.0 Capabilities : 0x80050400 Tuner Radio Device Capabilities Device Caps : 0x00050400 Tuner Radio Compliance test for device /dev/radio0 (not using libv4l2): Required ioctls: test VIDIOC_QUERYCAP: OK Allow for multiple opens: test second radio open: OK test VIDIOC_QUERYCAP: OK test VIDIOC_G/S_PRIORITY: OK Debug ioctls: test VIDIOC_DBG_G_CHIP_IDENT: OK (Not Supported) test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) test VIDIOC_LOG_STATUS: OK Input ioctls: test VIDIOC_G/S_TUNER: OK warn: v4l2-test-input-output.cpp(234): returned tuner 0 frequency out of range (6550200 not in [1400000...1728000]) test VIDIOC_G/S_FREQUENCY: OK test VIDIOC_S_HW_FREQ_SEEK: OK test VIDIOC_ENUMAUDIO: OK (Not Supported) test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) test VIDIOC_G/S_AUDIO: OK (Not Supported) Inputs: 0 Audio Inputs: 0 Tuners: 1 Output ioctls: test VIDIOC_G/S_MODULATOR: OK (Not Supported) test VIDIOC_G/S_FREQUENCY: OK test VIDIOC_ENUMAUDOUT: OK (Not Supported) test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) test VIDIOC_G/S_AUDOUT: OK (Not Supported) Outputs: 0 Audio Outputs: 0 Modulators: 0 Control ioctls: info: checking v4l2_queryctrl of control 'User Controls' (0x00980001) info: checking v4l2_queryctrl of control 'Mute' (0x00980909) info: checking v4l2_queryctrl of control 'Mute' (0x00980909) test VIDIOC_QUERYCTRL/MENU: OK info: checking control 'User Controls' (0x00980001) info: checking control 'Mute' (0x00980909) test VIDIOC_G/S_CTRL: OK info: checking extended control 'User Controls' (0x00980001) info: checking extended control 'Mute' (0x00980909) test VIDIOC_G/S/TRY_EXT_CTRLS: OK info: checking control event 'User Controls' (0x00980001) info: checking control event 'Mute' (0x00980909) test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) Standard Controls: 2 Private Controls: 0 Input/Output configuration ioctls: test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) test VIDIOC_ENUM/G/S/QUERY_DV_PRESETS: OK (Not Supported) test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) Format ioctls: test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported) test VIDIOC_G/S_PARM: OK (Not Supported) test VIDIOC_G_FBUF: OK (Not Supported) test VIDIOC_G_FMT: OK (Not Supported) test VIDIOC_TRY_FMT: OK (Not Supported) test VIDIOC_S_FMT: OK (Not Supported) test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) Codec ioctls: test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) test VIDIOC_G_ENC_INDEX: OK (Not Supported) test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) Buffer ioctls: test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported) Total: 38, Succeeded: 38, Failed: 0, Warnings: 1 Some printk() debugging showed that vidioc_s_hw_freq_seek() setups radio->curfreq to out of range value (lines 395-396) and calls amradio_set_freq() to set this frequency on device without any out-of-range checks. Patch protects from setting up frequency on device to incorrect value moving clamp_t check inside amradio_set_freq. With this patch we can call amradio_set_freq() with out of range frequency from any place. Also put comment that sometimes radio->curfreq is set to out of range value in vidioc_s_hw_freq_seek(). Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-15 04:12:06 +07:00
/* To check: sometimes radio->curfreq is set to out of range value */
radio->curfreq = (radio->buffer[1] << 8) | radio->buffer[2];
radio->curfreq = (radio->curfreq - 0x10) * 200;
amradio_send_cmd(radio, AMRADIO_STOP_SEARCH,
0, NULL, 0, false);
amradio_set_freq(radio, radio->curfreq);
retval = 0;
break;
}
}
amradio_send_cmd(radio, AMRADIO_STOP_SEARCH, 0, NULL, 0, false);
amradio_set_freq(radio, radio->curfreq);
return retval;
}
static int usb_amradio_s_ctrl(struct v4l2_ctrl *ctrl)
{
struct amradio_device *radio =
container_of(ctrl->handler, struct amradio_device, hdl);
switch (ctrl->id) {
case V4L2_CID_AUDIO_MUTE:
return amradio_set_mute(radio, ctrl->val);
}
return -EINVAL;
}
static int usb_amradio_init(struct amradio_device *radio)
{
int retval;
retval = amradio_set_mute(radio, true);
if (retval)
goto out_err;
retval = amradio_set_stereo(radio, true);
if (retval)
goto out_err;
retval = amradio_set_freq(radio, radio->curfreq);
if (retval)
goto out_err;
return 0;
out_err:
amradio_dev_err(&radio->vdev.dev, "initialization failed\n");
return retval;
}
/* Suspend device - stop device. Need to be checked and fixed */
static int usb_amradio_suspend(struct usb_interface *intf, pm_message_t message)
{
struct amradio_device *radio = to_amradio_dev(usb_get_intfdata(intf));
mutex_lock(&radio->lock);
if (!radio->muted) {
amradio_set_mute(radio, true);
radio->muted = false;
}
mutex_unlock(&radio->lock);
dev_info(&intf->dev, "going into suspend..\n");
return 0;
}
/* Resume device - start device. Need to be checked and fixed */
static int usb_amradio_resume(struct usb_interface *intf)
{
struct amradio_device *radio = to_amradio_dev(usb_get_intfdata(intf));
mutex_lock(&radio->lock);
amradio_set_stereo(radio, radio->stereo);
amradio_set_freq(radio, radio->curfreq);
if (!radio->muted)
amradio_set_mute(radio, false);
mutex_unlock(&radio->lock);
dev_info(&intf->dev, "coming out of suspend..\n");
return 0;
}
static const struct v4l2_ctrl_ops usb_amradio_ctrl_ops = {
.s_ctrl = usb_amradio_s_ctrl,
};
/* File system interface */
static const struct v4l2_file_operations usb_amradio_fops = {
.owner = THIS_MODULE,
.open = v4l2_fh_open,
.release = v4l2_fh_release,
.poll = v4l2_ctrl_poll,
.unlocked_ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops usb_amradio_ioctl_ops = {
.vidioc_querycap = vidioc_querycap,
.vidioc_g_tuner = vidioc_g_tuner,
.vidioc_s_tuner = vidioc_s_tuner,
.vidioc_g_frequency = vidioc_g_frequency,
.vidioc_s_frequency = vidioc_s_frequency,
.vidioc_s_hw_freq_seek = vidioc_s_hw_freq_seek,
.vidioc_log_status = v4l2_ctrl_log_status,
.vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
.vidioc_unsubscribe_event = v4l2_event_unsubscribe,
};
static void usb_amradio_release(struct v4l2_device *v4l2_dev)
{
struct amradio_device *radio = to_amradio_dev(v4l2_dev);
/* free rest memory */
v4l2_ctrl_handler_free(&radio->hdl);
v4l2_device_unregister(&radio->v4l2_dev);
kfree(radio->buffer);
kfree(radio);
}
/* check if the device is present and register with v4l and usb if it is */
static int usb_amradio_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
struct amradio_device *radio;
int retval;
radio = kzalloc(sizeof(struct amradio_device), GFP_KERNEL);
if (!radio) {
dev_err(&intf->dev, "kmalloc for amradio_device failed\n");
retval = -ENOMEM;
goto err;
}
radio->buffer = kmalloc(BUFFER_LENGTH, GFP_KERNEL);
if (!radio->buffer) {
dev_err(&intf->dev, "kmalloc for radio->buffer failed\n");
retval = -ENOMEM;
goto err_nobuf;
}
retval = v4l2_device_register(&intf->dev, &radio->v4l2_dev);
if (retval < 0) {
dev_err(&intf->dev, "couldn't register v4l2_device\n");
goto err_v4l2;
}
v4l2_ctrl_handler_init(&radio->hdl, 1);
v4l2_ctrl_new_std(&radio->hdl, &usb_amradio_ctrl_ops,
V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1);
if (radio->hdl.error) {
retval = radio->hdl.error;
dev_err(&intf->dev, "couldn't register control\n");
goto err_ctrl;
}
mutex_init(&radio->lock);
radio->v4l2_dev.ctrl_handler = &radio->hdl;
radio->v4l2_dev.release = usb_amradio_release;
strscpy(radio->vdev.name, radio->v4l2_dev.name,
sizeof(radio->vdev.name));
radio->vdev.v4l2_dev = &radio->v4l2_dev;
radio->vdev.fops = &usb_amradio_fops;
radio->vdev.ioctl_ops = &usb_amradio_ioctl_ops;
radio->vdev.release = video_device_release_empty;
radio->vdev.lock = &radio->lock;
radio->vdev.device_caps = V4L2_CAP_RADIO | V4L2_CAP_TUNER |
V4L2_CAP_HW_FREQ_SEEK;
radio->usbdev = interface_to_usbdev(intf);
radio->intf = intf;
usb_set_intfdata(intf, &radio->v4l2_dev);
radio->curfreq = 95.16 * FREQ_MUL;
video_set_drvdata(&radio->vdev, radio);
retval = usb_amradio_init(radio);
if (retval)
goto err_vdev;
retval = video_register_device(&radio->vdev, VFL_TYPE_RADIO,
radio_nr);
if (retval < 0) {
dev_err(&intf->dev, "could not register video device\n");
goto err_vdev;
}
return 0;
err_vdev:
v4l2_ctrl_handler_free(&radio->hdl);
err_ctrl:
v4l2_device_unregister(&radio->v4l2_dev);
err_v4l2:
kfree(radio->buffer);
err_nobuf:
kfree(radio);
err:
return retval;
}
/* USB Device ID List */
static const struct usb_device_id usb_amradio_device_table[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(USB_AMRADIO_VENDOR, USB_AMRADIO_PRODUCT,
USB_CLASS_HID, 0, 0) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, usb_amradio_device_table);
/* USB subsystem interface */
static struct usb_driver usb_amradio_driver = {
.name = MR800_DRIVER_NAME,
.probe = usb_amradio_probe,
.disconnect = usb_amradio_disconnect,
.suspend = usb_amradio_suspend,
.resume = usb_amradio_resume,
.reset_resume = usb_amradio_resume,
.id_table = usb_amradio_device_table,
};
USB: convert drivers/media/* to use module_usb_driver() This converts the drivers in drivers/media/* to use the module_usb_driver() macro which makes the code smaller and a bit simpler. Added bonus is that it removes some unneeded kernel log messages about drivers loading and/or unloading. Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Luca Risolia <luca.risolia@studio.unibo.it> Cc: Jean-Francois Moine <moinejf@free.fr> Cc: Frank Zago <frank@zago.net> Cc: Olivier Lorin <o.lorin@laposte.net> Cc: Erik Andren <erik.andren@gmail.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Brian Johnson <brijohn@gmail.com> Cc: Leandro Costantino <lcostantino@gmail.com> Cc: Antoine Jacquet <royale@zerezo.com> Cc: Jarod Wilson <jarod@redhat.com> Cc: Florian Mickler <florian@mickler.org> Cc: Antti Palosaari <crope@iki.fi> Cc: Michael Krufky <mkrufky@kernellabs.com> Cc: "David Härdeman" <david@hardeman.nu> Cc: Florent Audebert <florent.audebert@anevia.com> Cc: Sam Doshi <sam@metal-fish.co.uk> Cc: Manu Abraham <manu@linuxtv.org> Cc: Olivier Grenie <olivier.grenie@dibcom.fr> Cc: Patrick Boettcher <patrick.boettcher@dibcom.fr> Cc: "Igor M. Liplianin" <liplianin@me.by> Cc: Derek Kelly <user.vdr@gmail.com> Cc: Malcolm Priestley <tvboxspy@gmail.com> Cc: Steven Toth <stoth@kernellabs.com> Cc: "André Weidemann" <Andre.Weidemann@web.de> Cc: Martin Wilks <m.wilks@technisat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Jose Alberto Reguero <jareguero@telefonica.net> Cc: David Henningsson <david.henningsson@canonical.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Joe Perches <joe@perches.com> Cc: Jesper Juhl <jj@chaosbits.net> Cc: Lucas De Marchi <lucas.demarchi@profusion.mobi> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Alexey Khoroshilov <khoroshilov@ispras.ru> Cc: Anssi Hannula <anssi.hannula@iki.fi> Cc: Rafi Rubin <rafi@seas.upenn.edu> Cc: Dan Carpenter <error27@gmail.com> Cc: Paul Bender <pebender@gmail.com> Cc: Devin Heitmueller <dheitmueller@kernellabs.com> Cc: "Márcio A Alves" <froooozen@gmail.com> Cc: Julia Lawall <julia@diku.dk> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Chris Rankin <rankincj@yahoo.com> Cc: Lee Jones <lee.jones@canonical.com> Cc: Andy Walls <awalls@md.metrocast.net> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Dean Anderson <linux-dev@sensoray.com> Cc: Pete Eberlein <pete@sensoray.com> Cc: Arvydas Sidorenko <asido4@gmail.com> Cc: Andrea Anacleto <andreaanacleto@libero.it> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-19 00:46:12 +07:00
module_usb_driver(usb_amradio_driver);