OMAP3/4 clock: split into per-chip family files
clock34xx_data.c now contains data for the OMAP34xx family, the
OMAP36xx family, and the OMAP3517 family, so rename it to
clock3xxx_data.c. Rename clock34xx.c to clock3xxx.c, and move the
chip family-specific clock functions to clock34xx.c, clock36xx.c, or
clock3517.c, as appropriate. So now "clock3xxx.*" refers to the OMAP3
superset.
The main goal here is to prepare to compile chip family-specific clock
functions only for kernel builds that target that chip family. To get to
that point, we also need to add CONFIG_SOC_* options for those other
chip families; that will be done in future patches, planned for 2.6.35.
OMAP4 is also affected by this. It duplicated the OMAP3 non-CORE DPLL
clkops structure. The OMAP4 variant of this clkops structure has been
removed, and since there was nothing else currently in clock44xx.c, it
too has been removed -- it can always be added back later when there
is some content for it. (The OMAP4 clock autogeneration scripts have been
updated accordingly.)
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Benoît Cousson <b-cousson@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Ranjith Lohithakshan <ranjithl@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
2010-02-23 12:09:20 +07:00
|
|
|
/*
|
|
|
|
* OMAP3517/3505-specific clock framework functions
|
|
|
|
*
|
|
|
|
* Copyright (C) 2010 Texas Instruments, Inc.
|
2011-02-26 05:39:30 +07:00
|
|
|
* Copyright (C) 2011 Nokia Corporation
|
OMAP3/4 clock: split into per-chip family files
clock34xx_data.c now contains data for the OMAP34xx family, the
OMAP36xx family, and the OMAP3517 family, so rename it to
clock3xxx_data.c. Rename clock34xx.c to clock3xxx.c, and move the
chip family-specific clock functions to clock34xx.c, clock36xx.c, or
clock3517.c, as appropriate. So now "clock3xxx.*" refers to the OMAP3
superset.
The main goal here is to prepare to compile chip family-specific clock
functions only for kernel builds that target that chip family. To get to
that point, we also need to add CONFIG_SOC_* options for those other
chip families; that will be done in future patches, planned for 2.6.35.
OMAP4 is also affected by this. It duplicated the OMAP3 non-CORE DPLL
clkops structure. The OMAP4 variant of this clkops structure has been
removed, and since there was nothing else currently in clock44xx.c, it
too has been removed -- it can always be added back later when there
is some content for it. (The OMAP4 clock autogeneration scripts have been
updated accordingly.)
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Benoît Cousson <b-cousson@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Ranjith Lohithakshan <ranjithl@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
2010-02-23 12:09:20 +07:00
|
|
|
*
|
|
|
|
* Ranjith Lohithakshan
|
|
|
|
* Paul Walmsley
|
|
|
|
*
|
|
|
|
* Parts of this code are based on code written by
|
|
|
|
* Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu,
|
|
|
|
* Russell King
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
|
|
* published by the Free Software Foundation.
|
|
|
|
*/
|
|
|
|
#undef DEBUG
|
|
|
|
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/clk.h>
|
|
|
|
#include <linux/io.h>
|
|
|
|
|
|
|
|
#include "clock.h"
|
|
|
|
#include "clock3517.h"
|
2012-10-21 14:01:11 +07:00
|
|
|
#include "cm3xxx.h"
|
OMAP3/4 clock: split into per-chip family files
clock34xx_data.c now contains data for the OMAP34xx family, the
OMAP36xx family, and the OMAP3517 family, so rename it to
clock3xxx_data.c. Rename clock34xx.c to clock3xxx.c, and move the
chip family-specific clock functions to clock34xx.c, clock36xx.c, or
clock3517.c, as appropriate. So now "clock3xxx.*" refers to the OMAP3
superset.
The main goal here is to prepare to compile chip family-specific clock
functions only for kernel builds that target that chip family. To get to
that point, we also need to add CONFIG_SOC_* options for those other
chip families; that will be done in future patches, planned for 2.6.35.
OMAP4 is also affected by this. It duplicated the OMAP3 non-CORE DPLL
clkops structure. The OMAP4 variant of this clkops structure has been
removed, and since there was nothing else currently in clock44xx.c, it
too has been removed -- it can always be added back later when there
is some content for it. (The OMAP4 clock autogeneration scripts have been
updated accordingly.)
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Benoît Cousson <b-cousson@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Ranjith Lohithakshan <ranjithl@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
2010-02-23 12:09:20 +07:00
|
|
|
#include "cm-regbits-34xx.h"
|
|
|
|
|
|
|
|
/*
|
|
|
|
* In AM35xx IPSS, the {ICK,FCK} enable bits for modules are exported
|
|
|
|
* in the same register at a bit offset of 0x8. The EN_ACK for ICK is
|
|
|
|
* at an offset of 4 from ICK enable bit.
|
|
|
|
*/
|
|
|
|
#define AM35XX_IPSS_ICK_MASK 0xF
|
|
|
|
#define AM35XX_IPSS_ICK_EN_ACK_OFFSET 0x4
|
|
|
|
#define AM35XX_IPSS_ICK_FCK_OFFSET 0x8
|
|
|
|
#define AM35XX_IPSS_CLK_IDLEST_VAL 0
|
|
|
|
|
|
|
|
/**
|
|
|
|
* am35xx_clk_find_idlest - return clock ACK info for AM35XX IPSS
|
|
|
|
* @clk: struct clk * being enabled
|
|
|
|
* @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
|
|
|
|
* @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
|
|
|
|
* @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
|
|
|
|
*
|
|
|
|
* The interface clocks on AM35xx IPSS reflects the clock idle status
|
|
|
|
* in the enable register itsel at a bit offset of 4 from the enable
|
|
|
|
* bit. A value of 1 indicates that clock is enabled.
|
|
|
|
*/
|
2012-04-27 17:23:48 +07:00
|
|
|
static void am35xx_clk_find_idlest(struct clk_hw_omap *clk,
|
OMAP3/4 clock: split into per-chip family files
clock34xx_data.c now contains data for the OMAP34xx family, the
OMAP36xx family, and the OMAP3517 family, so rename it to
clock3xxx_data.c. Rename clock34xx.c to clock3xxx.c, and move the
chip family-specific clock functions to clock34xx.c, clock36xx.c, or
clock3517.c, as appropriate. So now "clock3xxx.*" refers to the OMAP3
superset.
The main goal here is to prepare to compile chip family-specific clock
functions only for kernel builds that target that chip family. To get to
that point, we also need to add CONFIG_SOC_* options for those other
chip families; that will be done in future patches, planned for 2.6.35.
OMAP4 is also affected by this. It duplicated the OMAP3 non-CORE DPLL
clkops structure. The OMAP4 variant of this clkops structure has been
removed, and since there was nothing else currently in clock44xx.c, it
too has been removed -- it can always be added back later when there
is some content for it. (The OMAP4 clock autogeneration scripts have been
updated accordingly.)
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Benoît Cousson <b-cousson@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Ranjith Lohithakshan <ranjithl@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
2010-02-23 12:09:20 +07:00
|
|
|
void __iomem **idlest_reg,
|
|
|
|
u8 *idlest_bit,
|
|
|
|
u8 *idlest_val)
|
|
|
|
{
|
|
|
|
*idlest_reg = (__force void __iomem *)(clk->enable_reg);
|
|
|
|
*idlest_bit = clk->enable_bit + AM35XX_IPSS_ICK_EN_ACK_OFFSET;
|
|
|
|
*idlest_val = AM35XX_IPSS_CLK_IDLEST_VAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* am35xx_clk_find_companion - find companion clock to @clk
|
|
|
|
* @clk: struct clk * to find the companion clock of
|
|
|
|
* @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in
|
|
|
|
* @other_bit: u8 ** to return the companion clock bit shift in
|
|
|
|
*
|
|
|
|
* Some clocks don't have companion clocks. For example, modules with
|
|
|
|
* only an interface clock (such as HECC) don't have a companion
|
|
|
|
* clock. Right now, this code relies on the hardware exporting a bit
|
|
|
|
* in the correct companion register that indicates that the
|
|
|
|
* nonexistent 'companion clock' is active. Future patches will
|
|
|
|
* associate this type of code with per-module data structures to
|
|
|
|
* avoid this issue, and remove the casts. No return value.
|
|
|
|
*/
|
2012-04-27 17:23:48 +07:00
|
|
|
static void am35xx_clk_find_companion(struct clk_hw_omap *clk,
|
|
|
|
void __iomem **other_reg,
|
|
|
|
u8 *other_bit)
|
OMAP3/4 clock: split into per-chip family files
clock34xx_data.c now contains data for the OMAP34xx family, the
OMAP36xx family, and the OMAP3517 family, so rename it to
clock3xxx_data.c. Rename clock34xx.c to clock3xxx.c, and move the
chip family-specific clock functions to clock34xx.c, clock36xx.c, or
clock3517.c, as appropriate. So now "clock3xxx.*" refers to the OMAP3
superset.
The main goal here is to prepare to compile chip family-specific clock
functions only for kernel builds that target that chip family. To get to
that point, we also need to add CONFIG_SOC_* options for those other
chip families; that will be done in future patches, planned for 2.6.35.
OMAP4 is also affected by this. It duplicated the OMAP3 non-CORE DPLL
clkops structure. The OMAP4 variant of this clkops structure has been
removed, and since there was nothing else currently in clock44xx.c, it
too has been removed -- it can always be added back later when there
is some content for it. (The OMAP4 clock autogeneration scripts have been
updated accordingly.)
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Benoît Cousson <b-cousson@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Ranjith Lohithakshan <ranjithl@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
2010-02-23 12:09:20 +07:00
|
|
|
{
|
|
|
|
*other_reg = (__force void __iomem *)(clk->enable_reg);
|
|
|
|
if (clk->enable_bit & AM35XX_IPSS_ICK_MASK)
|
|
|
|
*other_bit = clk->enable_bit + AM35XX_IPSS_ICK_FCK_OFFSET;
|
|
|
|
else
|
|
|
|
*other_bit = clk->enable_bit - AM35XX_IPSS_ICK_FCK_OFFSET;
|
|
|
|
}
|
2012-04-27 17:23:48 +07:00
|
|
|
const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait = {
|
|
|
|
.find_idlest = am35xx_clk_find_idlest,
|
|
|
|
.find_companion = am35xx_clk_find_companion,
|
|
|
|
};
|
OMAP3/4 clock: split into per-chip family files
clock34xx_data.c now contains data for the OMAP34xx family, the
OMAP36xx family, and the OMAP3517 family, so rename it to
clock3xxx_data.c. Rename clock34xx.c to clock3xxx.c, and move the
chip family-specific clock functions to clock34xx.c, clock36xx.c, or
clock3517.c, as appropriate. So now "clock3xxx.*" refers to the OMAP3
superset.
The main goal here is to prepare to compile chip family-specific clock
functions only for kernel builds that target that chip family. To get to
that point, we also need to add CONFIG_SOC_* options for those other
chip families; that will be done in future patches, planned for 2.6.35.
OMAP4 is also affected by this. It duplicated the OMAP3 non-CORE DPLL
clkops structure. The OMAP4 variant of this clkops structure has been
removed, and since there was nothing else currently in clock44xx.c, it
too has been removed -- it can always be added back later when there
is some content for it. (The OMAP4 clock autogeneration scripts have been
updated accordingly.)
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Benoît Cousson <b-cousson@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Ranjith Lohithakshan <ranjithl@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
2010-02-23 12:09:20 +07:00
|
|
|
|
|
|
|
/**
|
|
|
|
* am35xx_clk_ipss_find_idlest - return CM_IDLEST info for IPSS
|
|
|
|
* @clk: struct clk * being enabled
|
|
|
|
* @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
|
|
|
|
* @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
|
|
|
|
* @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
|
|
|
|
*
|
|
|
|
* The IPSS target CM_IDLEST bit is at a different shift from the
|
|
|
|
* CM_{I,F}CLKEN bit. Pass back the correct info via @idlest_reg
|
|
|
|
* and @idlest_bit. No return value.
|
|
|
|
*/
|
2012-04-27 17:23:48 +07:00
|
|
|
static void am35xx_clk_ipss_find_idlest(struct clk_hw_omap *clk,
|
OMAP3/4 clock: split into per-chip family files
clock34xx_data.c now contains data for the OMAP34xx family, the
OMAP36xx family, and the OMAP3517 family, so rename it to
clock3xxx_data.c. Rename clock34xx.c to clock3xxx.c, and move the
chip family-specific clock functions to clock34xx.c, clock36xx.c, or
clock3517.c, as appropriate. So now "clock3xxx.*" refers to the OMAP3
superset.
The main goal here is to prepare to compile chip family-specific clock
functions only for kernel builds that target that chip family. To get to
that point, we also need to add CONFIG_SOC_* options for those other
chip families; that will be done in future patches, planned for 2.6.35.
OMAP4 is also affected by this. It duplicated the OMAP3 non-CORE DPLL
clkops structure. The OMAP4 variant of this clkops structure has been
removed, and since there was nothing else currently in clock44xx.c, it
too has been removed -- it can always be added back later when there
is some content for it. (The OMAP4 clock autogeneration scripts have been
updated accordingly.)
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Benoît Cousson <b-cousson@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Ranjith Lohithakshan <ranjithl@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
2010-02-23 12:09:20 +07:00
|
|
|
void __iomem **idlest_reg,
|
|
|
|
u8 *idlest_bit,
|
|
|
|
u8 *idlest_val)
|
|
|
|
{
|
|
|
|
u32 r;
|
|
|
|
|
|
|
|
r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
|
|
|
|
*idlest_reg = (__force void __iomem *)r;
|
|
|
|
*idlest_bit = AM35XX_ST_IPSS_SHIFT;
|
|
|
|
*idlest_val = OMAP34XX_CM_IDLEST_VAL;
|
|
|
|
}
|
2012-04-27 18:05:52 +07:00
|
|
|
|
2012-04-27 17:23:48 +07:00
|
|
|
const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait = {
|
|
|
|
.allow_idle = omap2_clkt_iclk_allow_idle,
|
|
|
|
.deny_idle = omap2_clkt_iclk_deny_idle,
|
|
|
|
.find_idlest = am35xx_clk_ipss_find_idlest,
|
|
|
|
.find_companion = omap2_clk_dflt_find_companion,
|
|
|
|
};
|