This code was dropped while importing from upstream. It is needed
to allow the legacy renaming of interfaces like eth* or wlan*.
X-Eudev-Bug: 56
X-Eudev-Bug-URL: https://github.com/gentoo/eudev/issues/56
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
Previously, rootprefix was set to the actual value of the default prefix,
which caused issues when running 'make distcheck' since prefix is set
to a non-standard value but rootprefix is unset. By assigning the variable
rather than its contents, this should now be avoided.
Both scripts had hard-coded paths to 'rule_generator.functions'; these were changed
to be substituted in by configure so the paths will match where files are
installed.øy
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
This restores the rule generator scripts for the persistent
network and optical device rule generator scripts that were
removed after udev-171, and re-introduces their installation
to the build system.
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
Distros that whish to support old kernels should set
--with-firmware-dirs="/usr/lib/firmware/updates:/usr/lib/firmware"
to retain the old behaviour.
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
Signed-off-by: Ian Stakenvicius <axs@gentoo.org>
ie, fix another regression in our build system ; gentoo bug 455326
it's common for eg. mips systems to not have symlink from the directory
{lib32 or lib64} to /lib. only the libraries belong to /$(get_libdir) and
everything in /lib/udev goes to, well, /lib/udev, NOT /$(get_libdir)/udev
-- ssuominen
Signed-off-by: Ian Stakenvicius <axs@gentoo.org>
Embedded systems may not want to include util-linux when they do
not intend to use blkid functionality
Modified from original author's commit to not install
60-persistent-storage.rules if blkid is disabled
systemd commit f553b3b1074151200187df916427a1468186435e
Original author: Anders Olofsson <Anders.Olofsson@axis.com>
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
This option should be enabled by default, however there was no logic
in AC_ARG_ENABLE to set the variable to be enabled when the flag was
unspecified
Signed-off-by: Ian Stakenvicius <axs@gentoo.org>
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
We add an autotools check to use mkstemp() and fcntl() when mkostemp()
is missing. This is not strictly equivalent because we have no way of
setting the file access mode O_WRONLY flag, but that should produce no
functional difference.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
Add --enable-legacylib option to configure, allowing for build and
installation of libudev.so.0 shared library for supporting pre-udev-183
software. Library is installed to rootlibdir.
Note that this legacy library will not be maintained, and should not be used
for anything other than supporting a working system until all software
on the system is migrated to use libudev.so.1
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
We haven't confirmed yet that everything is compliant with
196 but libudev is and it seems relevant that udevadm reports
the udev version that provides hwdb functions
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
Keymaps rules had stated to add or modify /usr/lib/udev/* files instead
of using generic paths, and there was no mention of /etc/udev/* being valid
even though it is (and is the better way to do system-specific
modifications)
Since these keymaps are the default reference files they should be
installed in the same location as the default rules files. This
matches sys-fs/udev behaviour as well
This is necessary because the code originally defined paths assuming UDEV_LIBEXECDIR
was /usr prefixed, and also that udevrulesdir was located in /etc. Since (1) both of
these defaults have changed, and (2) they could be set to more or less anything, we
want to ensure that there is support for the standard paths as well, irrespective of
what UDEV_LIBEXECDIR and UDEV_RULES_DIR are set to.
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
Commit ff2c503df0 introduced accept4() into
udev, which broke compatibility with kernels older than Linux 2.6.32 (or
Linux 2.6.36 on ARM). The purpose of accept4() is to permit
O_NONBLOCK and O_CLOEXEC to be specified at the accept() call site
while previously, they had to be set using fcntl() because Linux does
not inherit them.
Since accept4() increases the minimum kernel version, we add a fallback
path for situations in which it is unavailable.
Reported-by: Stephen Klimaszewski <steev@gentoo.org>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Module loading support was unconditionally disabled in the initial
autotools tests. I had missed this in my testing because I still had the
80-drivers.rules file from udev 171 on my system, which masked this
issue by invoking modprobe explicitly. This patch corrects the issue.
Signed-off-by: Richard Yao <ryao@gentoo.org>
The use of the eudev version in pkgconfig files caused build failures,
so we switch to the udev version for compatibility purposes.
Resolvesgentoo/eudev#22
Signed-off-by: Richard Yao <ryao@gentoo.org>
This commit makes sure that src/gudev/gudevprivate.h is included
in the distribution, fixing a failure in building gudev with
`make distcheck`. There's also some code cleanup and migration
of all configurable paths to the main configure.ac file.
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
This commit the related issues of building gudev with/out
introspection. It draws on suggestions from nvinson in
https://github.com/gentoo/eudev/pull/20
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
We move the test-udev.c and test-libudev.c from src/test to test.
This corrects the a problem with hard coded relative paths finding
the test/test/sys directory created by test/udev-test.pl.
This commit draws heavily from nvinson patch in
https://github.com/gentoo/eudev/pull/20
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
This commit is a continuation of the previous one in which all the configured
paths obtained in configure.ac are propagated to the Makefile.am and .c files
via AM_CPPFLAGS of the form -DUDEV_CONF_FILE=\"$(udevconffile)\". This should
address the issue in
https://github.com/gentoo/eudev/issues/17
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
The configuration of the installation paths for various components
was scattered between the main configure.ac file and the various
Makefile.am's. These components are: udev config file, hwdb, keymaps
and force-release keymaps and the rules. This commit consolidates
them all into one point in configure.ac and anticipates the inclusion
of new AM_CPPFLAGS of the form -DHWDB_BIN=@udevhwdbdir@ as upstream
has done, so it is easier to address issues like:
https://github.com/gentoo/eudev/issues/17
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
The original checks for python were to build some man pages and
for systemd-python. These checks are no longer relevant. There
still is a dependency on python for tests but this is checked by
test/rules-test.sh which tests for python or skips. Also, there
is a dependency on perl for both tests and hwdb. These checks can
be reintroduced at a future date when re revisit both.
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
The GTK_DOC_CHECK macro includes AC_ARG_ENABLE/AS_HELP_STRING etc
for --enable-gtk-doc and there is no need for a second check.
One caveat should be noted: GTK_DOC_CHECK must begin the line for
gtkdocize to recognize its presense in configure.ac.
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
The keys/keymap test preformed by src/keymap/check-keymaps.sh must
find both keys.txt and the keymap directory. When building out of
the source tree, eg when doing `make distcheck`, these are located
at ${top_builddir}/src/keymap/keys.txt and ${top_srcdir}/keymap/,
respectively. This patch fixes the build so that these are now
correctly found.
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
This commit reintroduces code to
1) build src/keymap
2) test keymap/Makefile.am that it has all the key maps listed
3) test that all the key names in keymap/* are in <linux/input.h>
4) do a syntax check on rules/*.rules which now includes
95-keymap.rules and 95-keyboard-force-release.rules
For #4, the regex expressions in rule-syntax-check.py had to be
updated. They do not allow trailing comments via # comment, and
I did not include that. A rule in 95-keymap.rules had to have its
comment moved from the end to another line.
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
